AVETTE

CAR looks freakin awesome. Thanks for the great write up and pics. I am going to do this conversion on my 07 black vert. I know the rear gm quarters have to be slightly moddified to fit with the vert but I know Nate at xtreme did it with no problem. Thanks again for the great write up

KDubb

did anyone ever convert this to a .pdf ?


what tools are required?

I think im going to start mine tonight

Vettlldo

Yes, a PDF was rendered. Bill provided me with all of his source Word files and I replied with a PDF. I am not sure if we can post a .pdf file format on this forum or not and it's Bill's creative endeavor not mine (I didn't want to step on any toes or claim ownership of someone else's hard work).

Ed

burtonbl103

I need to send you the remainder and one change with the front ducts !

webdzynes

Can we get a new, updated pdf for this? (Maybe it should be a sticky...)

KDubb

well, whoever has it, can they email it ??


kwebber@gmail.com



THANKS !!

Vettlldo

Ok, just let me know and I can update the final PDF document. I will send you a PM with my email address. Did you want to look into posting the PDF as a sticky?

Ed

KDubb

i cant wait!

burtonbl103

Sure Post it all you want

Vettlldo

See attached.

Atomic-Vette

looks good! I'll be using this when I start installing mine, hopefully next week depending on the body shop.

oh by the way it's "torx" not "torq's"

'03blackonblack

I am ready to do mine, I have all the parts, everything painted, just have to get the front fender clip thing figured out!!!!

Vettlldo

Thanks for the tip on "torx". I am not the author but I will correct that typo.

Ed

HOFFIE

VetteJoel & Myself have done alot of rear fenders,so I figured we should post several pics from start to finish.We are Doing A MY 2005 this Sunday,so I will post pic's when it is completed(Sunday night).

Atomic-Vette

I used your parts list to order all hte parts for my conversion, however I had one question.

On the rear parts list (Bottom of the list) there a part number
11519444= Pushpin Fasteners

My question is, you say "pushpin fastener(s) but only one part number with no quantity listed. do you only need one or does that part number include multiple pins?

HOFFIE

I believe there a a few pushpins with that #.I would not use those,but id prefer to use the stock clamps & screws from the stock.

Atomic-Vette

cool thanks!

I'll be doing my conversion middle of next week I guess, talked to the guys at the body shop and my parts should be done monday!

427mustang

Please review your parts list and update as necessary.

The following parts need to be added for the front.


Front fender
15807844 right scoop outer
15807845 left scoop outer
15895240 right scoop inner
15895241 left scoop inner
11609934 clip (10 each)
11610092 screw (10 each)

15801407 bumper scoop trim

Vettlldo

The source document was updated and a new PDF rendered/attached to this thread (see Post 50). Also, it's probably time to update the entire document and format similar to the Z06 exhaust upgrade I posted elsewhere on this forum. I would use a table of part #'s with GM callout #'s and corresponding descriptions. However, I would need a digital copy of the front/rear parts and callout #'s. If anyone can provide this information, let me know.

Ed

RanGer498

how many Pushpin fasteners (item # 11519444) will we need ?

also the seals (item # 11519444) tells me No Parts Found

thanks