Has Anyone had an alignment done using a John Beam Visualiner 3D
07-28-2009, 08:34 AM
#1
Melting Slicks
Thread Starter
Member Since: Sep 2000
Location: Tampa, FL
Posts: 3,494
Received 511 Likes
on
192 Posts
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
Has Anyone had an alignment done using a John Beam Visualiner 3D
I have always heard that Hunter was the standard but several shop are using this machine. Has anyone had an alignment done using this machine ? 
07-28-2009, 08:43 AM
#2
Race Director
No, but some have said that by the way theirs handles, some were done on a "Jim" Beam machine. 
All kidding aside, I always have heard the Hunter was the best.
All kidding aside, I always have heard the Hunter was the best.
07-28-2009, 08:52 AM
#3
Race Director
Member Since: Jan 2002
Location: I love you & miss you Linda
Posts: 19,479
Received 1,402 Likes
on
610 Posts
2017 C7 of the Year Finalist
St. Jude Contributor
Phoenix Performance, the race shop where all my work is done uses the John Bean Visualiner 3D2 alignment system exclusively.
If it is good enough for Phoenix Performance, it is good enough for the best. They align my car at least twice a year...
My car drives like it's on rails...
If it is good enough for Phoenix Performance, it is good enough for the best. They align my car at least twice a year...
My car drives like it's on rails...
07-28-2009, 08:56 AM
#4
Race Director
Phoenix Performance, the race shop where all my work is done uses the John Bean Visualiner 3D2 alignment system exclusively.
If it is good enough for Phoenix Performance, it is good enough for the best. They align my car at least twice a year...
My car drives like it's on rails...
If it is good enough for Phoenix Performance, it is good enough for the best. They align my car at least twice a year...
My car drives like it's on rails...
07-28-2009, 09:20 AM
#5
Melting Slicks
Thread Starter
Member Since: Sep 2000
Location: Tampa, FL
Posts: 3,494
Received 511 Likes
on
192 Posts
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
Phoenix Performance, the race shop where all my work is done uses the John Bean Visualiner 3D2 alignment system exclusively.
If it is good enough for Phoenix Performance, it is good enough for the best. They align my car at least twice a year...
My car drives like it's on rails...
If it is good enough for Phoenix Performance, it is good enough for the best. They align my car at least twice a year...
My car drives like it's on rails...
Last edited by Snake Slayer; 07-28-2009 at 09:28 AM.
