Project Z51EXTREME
#602
Former Vendor
Member Since: Nov 2005
Location: Ossining New York
Posts: 11,792
Received 243 Likes
on
183 Posts
St. Jude Donor '07-'08-'09-'10-'12-'13-'14
Don't worry Kevin.... We have the technology! We can REBUILD IT!
Don't worry Kevin.... We have the technology! We can REBUILD IT!
BETTER, STRONGER....FASTER Than it was before!
Look what I found!!! I had this EXACT lunch box in school!!!
Kevin... Don't sweat it man... We'll get you back in business!
Chuck CoW
BETTER, STRONGER....FASTER Than it was before!
Look what I found!!! I had this EXACT lunch box in school!!!
Kevin... Don't sweat it man... We'll get you back in business!
Chuck CoW
#603
Race Director
Member Since: Jun 2006
Location: Lawton, OK
Posts: 10,297
Received 9,512 Likes
on
2,317 Posts
C7 & C8 Events Correspondent
Tech Contributor
2020 C8 of the Year Finalist - Unmodified
2020 Corvette of the Year (track prepared)
2020 Corvette of the Year Finalist (appearance mods)
C7 of Year Winner (appearance mods) 2019
2017 C7 of Year Finalist
2015 C7 of the Year
St. Jude Donor '14-'15-'16-'17-'18-'19
Kevin, sorry to hear about the accident, but I'm glad you're okay. Hang in there!!
#605
Drifting
Thread Starter
Had the frame and alignment check Friday. I was quite pleased to find out everything was ok. It did not even need aligned and it had been 20k+ since last alignment. Adjusted the steering wheel to center a little and that was it. I removed all the ground effects and temporary bolted the bumper and diffuser together to be able to take it to a show that I have been planning on going to for awhile. This winter I will start the tear down and bodywork. From 20 feet away it would be hard to tell there was damage, the front and rear bumper popped backed out, it did mess up the paint where it flexed, has some cracks and tears. I have Chrome specialty insurance and they are sending me a check that will cover it all especially since my son in law and I will do the work. I would recommend Chrome insurance, they also had some of the better rates. I feel I should do a chevy commercial how tough vettes are, actually I just got lucky there was not more damage and it did not flip. A spin backwards at 50-55 mph doesn't always end well. Fortunately there was enough water on the road to keep it sliding and it kept the shiny side up. Thanks for all asking.
#607
Drifting
Thread Starter
Took off broken parts, bolted, zip-tied and double side Tape parts together. Took 2nd at Sulphur Springs, TX car show. A great show 183 vettes. Start rebuild this winter
#608
Race Director
Member Since: Jun 2006
Location: Lawton, OK
Posts: 10,297
Received 9,512 Likes
on
2,317 Posts
C7 & C8 Events Correspondent
Tech Contributor
2020 C8 of the Year Finalist - Unmodified
2020 Corvette of the Year (track prepared)
2020 Corvette of the Year Finalist (appearance mods)
C7 of Year Winner (appearance mods) 2019
2017 C7 of Year Finalist
2015 C7 of the Year
St. Jude Donor '14-'15-'16-'17-'18-'19
#611
Drifting
Thread Starter
#613
Drifting
Thread Starter
The following users liked this post:
Smooth72 (04-03-2016)
#619
Drifting
Thread Starter
It has been a while since I have done anything to it, but I did enjoy driving it to work. Hopefully soon I can freshener back up buy fixing painting the ground FX.