dash lettering
09-20-2011, 10:49 PM
#3
Burning Brakes
I bought the stainless steel letters and painted them. Look great. I had tried the plastic and vinyl. Went to the stainless.
Took some preparation and a few coats of paint.
Craig
Took some preparation and a few coats of paint.
Craig
09-21-2011, 02:31 AM
#4
Race Director
I installed vinyl/plastic letters that I got from Forum Vendor RPI.
Chrome on the rear bumper and VR for the dash.
In both cases, prep was key. Scrub with alcohol repeatedly, use an adhesion promoter and let them set up overnight in a warm space.
Very nice, affordable upgrade.
Chrome on the rear bumper and VR for the dash.
In both cases, prep was key. Scrub with alcohol repeatedly, use an adhesion promoter and let them set up overnight in a warm space.
Very nice, affordable upgrade.
09-21-2011, 05:06 AM
#5
Race Director
I didn't like the way they looked on mine,I peeled them off. Use lots of alcohol to clean dash because letters don't stick too good,use a Q-tip to put pressure on letters to help stick.