Carbon Fiber Vinyl Wrap (Pixs Inside)
06-11-2011, 06:22 PM
#1
Pro
Thread Starter
Carbon Fiber Vinyl Wrap (Pixs Inside)
So I bought this Carbon Fiber vinyl wrap from ebay and decided to try it out and see how it looks. I started with the fuse box just screwing around to see how it would look(didnt even cut out the Fuse Symbol lol) then decided to get serious and did the Side Pillars and door handles. I screwed it up the 1st time so i had to do it over but now I think it looks great!. It is very time consuming as you need to be very steady when cutting or you will mess the whole thing up and have to redo it.
I am thinking about doing my whole glass top in the wrap as it might look good.
It was simple to apply. Just peel and stick. VERY STICKY so it wont come off easy!.
Heres some pictures
Thanks
I am thinking about doing my whole glass top in the wrap as it might look good.
It was simple to apply. Just peel and stick. VERY STICKY so it wont come off easy!.
Heres some pictures
Thanks
Last edited by kingdady; 06-11-2011 at 06:34 PM.
06-11-2011, 06:31 PM
#2
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,076
Received 8,910 Likes
on
5,325 Posts
So I bought this Carbon Fiber vinyl wrap from ebay and decided to try it out and see how it looks. I started with the fuse box just screwing around to see how it would look(didnt even cut out the Fuse Symbol lol) then decided to get serious and did the Side Pillars and door handles. I screwed it up the 1st time so i had to do it over but now I think it looks great!. It is very time consuming as you need to be very steady when cutting or you will mess the whole thing up and have to redo it.
I am thinking about doing my whole glass top in the wrap as it might look good.
It was simple to apply. Just peel and stick. VERY STICKY so it wont come off easy!.
Heres some pictures( If someone can upload them that would be great too)
Thanks
I am thinking about doing my whole glass top in the wrap as it might look good.
It was simple to apply. Just peel and stick. VERY STICKY so it wont come off easy!.
Heres some pictures( If someone can upload them that would be great too)
Thanks
into the box that opens up when you click on the yellow scenery icon on the forum post box.
Bill
other than the bubbles in the fuse cover
06-11-2011, 06:42 PM
#5
Pro
Thread Starter
Fuse box is not bubbles.. its the raise image of the fuse symbol.. so I cant flaten it. I think if i cut it out it will look worst then it does now. I am gonna search around for a Fuse sticker to throw ontop of that area
06-11-2011, 06:43 PM
#6
Safety Car
do you have any left sand the cover smooth then redo it.
06-11-2011, 11:42 PM
#8
Supporting Vendor
Member Since: Sep 2007
Location: Pensacola Florida GO GATORS!!! www.rlsebring.com www.c6c7vette.com
Posts: 11,216
Received 174 Likes
on
92 Posts
St. Jude Donor '17
I like the pillars although I would have spent the extra in order to do them mirror image rather than random directions.
06-12-2011, 12:15 AM
#10
Pro
Thread Starter
06-12-2011, 08:52 AM
#12
Team Owner
Door handles look really good.
06-12-2011, 02:57 PM
#15
Guest
Posts: n/a
This must be getting pretty popular because I had a lot of people at the car show ask me if my CF spoiler was real CF. I'm thinking WTF, of course it's real carbon fiber. Guess they were wondering if I just wrapped a spoiler in it lol. Now I get it
