Billy Boat Exhaust Systems
11-04-2011, 10:41 PM
#1
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,618
Received 314 Likes
on
287 Posts
St. Jude Donor '06-'07, '13, '15
Billy Boat Exhaust Systems
Billy Boat Exhausts have become one of the premiere exhaust manufacturers for the Corvette. Since 1989 they've been manufacturing and building top of the line exhaust systems, and have always been at the very top of the Corvette exhaust R&D market. Each Billy Boat exhaust is manufactured from the highest quality stainless steel components and is designed with the specific vehicle's exhaust flow and tonal needs in mind. It's this attention to detail, quality, and performance that has made them so popular and that makes us at Southern Car Parts so proud to be your number one source for Billy Boat systems.
All Billy Boat exhaust systems on our website are on sale well below the MSRP price, and we stock most of them for your Corvette ordering needs. We've installed Billy Boat exhaust systems on our Corvettes here over the years, and have consistently been impressed with them. This impression is what has brought us to support and respect their products as much as we do.
All that being what it is, we run in to a lot of questions about the various Billy Boat exhaust systems. Because they make so many different types of exhaust systems, and each one has its own ideal use and Corvette application, these questions typically boil down to which exhaust is right for each customer. To try and help clear up some of the confusion, and to help you decide if or which Billy Boat exhaust system is right for you, we wanted to address the benefits and characteristics of each one.
For the C6 Corvette, and especially the C6 Z06 and ZR1, the Billy Boat Fusion Exhaust is the undeniable favorite. This system has been so incredibly popular because it, like the stock NPP Exhaust system, is a true bi-modal exhaust. When GM designed and introduced bi-modal exhaust systems for their flagship Corvette line-up they took the automotive world by storm. These exhausts are brilliant for offering a more tame and quiet driving experience at lower RPM ranges, while also opening up their valves for a wide open roar under more intense, heavy acceleration, and red-line pushing driving conditions. Of course, even with that in mind, the stock mufflers designed by Chevrolet are way too restrictive for the sound most people want and expect out of their small block V8 engine.
The Fusion Exhaust provides that same bi-modal functionality with a more aggressive and race inspired tone. With the tips closed, the Fusion and the Stock exhaust are comparable. The fusion's tone is deepened and cleaner, but, it's not noticeably louder; however, when a Corvette outfitted with a Fusion Exhaust opens up, the sound is unmistakable. The Fusion provides a hearty, muscle-car tone when wide open that is similar to the B&B Bullet exhaust, only a little bit quieter. This is achieved through the use of shortened Fusion mufflers that provide a more free-flowing and resonant exhaust.
The Fusion is also a brilliant exhaust because it allows for C6 Corvettes that did not opt for the NPP stock exhaust to upgrade to a complete bi-modal system. Billy Boat sells their Fusion with a complete bi-modal upgrade kit that comes with all of the necessary attachments to turn your single mode Corvette in to a vacuum controlled bi-modal machine.
The Fusion is available for all C6 Corvette models in various forms:
For 2005-08 C6 Corvettes the Billy Boat Fusion comes in a 2.5" system complete with full NPP set-up. Pricing and ordering information available here: C6 Corvette Billy Boat Fusion Complete Kit
For 2009 and newer C6 Corvettes without the stock NPP, the Fusion Exhaust is available with all necessary NPP set-up equipment as well. Pricing and ordering information available here: C6 Billy Boat Fusion Complete Kit
For 2009 and newer Corvettes that are already outfitted with the bi-modal NPP exhaust but want to upgrade over the stock mufflers, there is a Fusion Exhaust for you as well. Pricing and ordering information available here: C6 NPP B&B Fusion Exhaust
Finally, for Z06 and ZR1 C6 Corvettes, there is a 3" Billy Boat Fusion Exhaust for you as well to help you upgrade your restrictive stock mufflers to the more powerful and free-flowing Billy Boat alternative. Pricing and ordering information available here: C6 Z06 and ZR1 Fusion Exhaust
Video and Sound Clip of the Fusion Exhaust on a C6 Z06 is available here.
For some people, however, the bi-modal exhaust functionality is not ideal. If you're one of those people, then the very original and very clean straight-through exhaust design of the Billy Boat Bullet exhaust may be perfect for you. The Bullet is one of the most, if not the single most, aggressive exhaust systems on the market for the C6 Corvette today. Designed to optimize exhaust flow for peak performance numbers and the most powerful and throaty exhaust tone, the Bullet is as loud and as powerful an exhaust as there is.
The Bullet utilizes a very classic muscle-car design with straight-through high-flowing mufflers that provide a deep and throaty resonance for a very classic muscle car tone. The crescendo through the RPM range with the Bullet exhaust is one of volume and strength that harkens back to the classic American muscle car age with thunder and bravado; of course, the C6 Corvette-with all of its technological improvements and incredible power numbers-is anything but an old muscle car, and Billy Boat was able to design the Bullet to truly pay tonal homage to the Corvettes of the 60's and 70's, while also still holding true to the modern Corvette's undeniable race pedigree.
For a Corvette enthusiast that not only doesn't mind loud, but feeds and thrives off of it, the Bullet exhaust may be perfect for you. If you're not afraid of drone, or of rattling the windows of your neighbor's home when you start your 'Vette up in the morning, then you may want to check out the Bullet. Just as the Fusion is designed and modified to specifically meet the needs of each model and generation C6 Corvette, so is the Bullet.
For 2005-08 Corvettes check out the Billy Boat C6 Bullet Exhaust System.
For 2009 and newer base C6 Corvettes check the B&B Corvette C6 Bullet out on our website here.
For C6 Z06 and ZR1 Corvettes, you can find find pricing and ordering information for the Z06 and ZR1 Billy Boat Bullet exhaust here.
If you prefer the straight-through exhaust design, but aren't a fan of Cabin Drone or excessive noise like you would expect with a Bullet exhaust, then Billy Boat's newest exhaust design, the PRT System, would be perfect for you. The PRT, which stands for Purge Resonance Technology, is a masterpiece of engineering and design brought to you by Billy Boat. This complete redesigned and reengineered exhaust for the C6 Corvette is the latest in Billy Boat's history of designing powerful exhaust tones with drone control in mind.
The PRT offers a more subdued touring tone at regular driving speeds than the Bullet, with a more race-inspired straight-through tone and design than the Fusion. This results in greater HP and Torque gains across the entire RPM band--Dynos on some C6 Corvettes have reported as much as 18hp, with 14-15 being a commonly achieved norm. The Purge Chamber technology helps keep the exhaust mellow at cruising speeds but allows it to open up for a very aggressive and powerful tone under more extreme driving conditions that is similar to the Bullet in quality. Where the PRT separates itself from the Bullet, however, is in its minimal Cabin Drone. "Drone" has become a no-no for modern exhausts and a dangerous word around the forum community, we know, and Billy Boat took that to heart when designed this exhaust. For the powerful tone and volume this system puts out, the drone is absolutely minimal. What this gives is a straight-through exhaust that sounds beautifully, and couples perfectly with automatic or paddle shifter Corvettes, as well as those with complete Long Tube header packages.
For 2005-08 C6 Corvettes, check out our web listing on the Billy Boat C6 Corvette PRT Exhaust for more information and ordering.
For the 2009 and newer C6 Corvettes, check out the following listing for pricing and ordering information:Billy Boat Corvette PRT Exhaust.
If you drive a Z06 or ZR1 and this exhaust sounds ideal for you, check out the C6 Corvette Z06 and ZR1 B&B PRT Exhaust System.
Of course, Billy Boat doesn't stop with all of these options either. Each and every Billy Boat exhaust for the C6 Corvette is available in your choice of Quad Round and Quad Oval Exhaust tips. These tips are all manufactured from the highest quality polished stainless steel for a beautiful and aggressive visual finish that will match your vehicle's new found tonal and performance benefits. If Polished Stainless Steel isn't your bag, Billy Boat exhaust tips are also now available in hand-dipped Black Satin finish. This provides your Corvette with a very unique aftermarket appearance that, when coupled with an exhaust filler plate or panel, can make for a gorgeous offset look. They also look especially great on blacked-out C6 Corvettes going for the Bat-mobile style.
All Billy Boat Exhausts are also available with a Billy Boat X-Pipe. An aftermarket X-Pipe from Billy Boat will help increase exhaust flow even further by replacing the restrictive and archaic stock H-Pipe design. X-Pipes also work to even out exhaust flow and remove the Deceleration Popping noise that many Corvette owners know and dread. For information on Billy Boat X-Pipes please refer to our website, or give us a call at our office and we can make sure to get the perfect one for your needs.
If there are any other questions you may have about the Billy Boat systems above, or about any other Billy Boat product (or any product we carry here at Southern Car Parts) please do not hesitate to ask. Give us a call at our office at (770)919-1433 and we'll do our best to answer your questions and help you outfit your C6 Corvette as best as possible.
Please click links above for pricing and ordering information.
Thanks,
Matt
All Billy Boat exhaust systems on our website are on sale well below the MSRP price, and we stock most of them for your Corvette ordering needs. We've installed Billy Boat exhaust systems on our Corvettes here over the years, and have consistently been impressed with them. This impression is what has brought us to support and respect their products as much as we do.
All that being what it is, we run in to a lot of questions about the various Billy Boat exhaust systems. Because they make so many different types of exhaust systems, and each one has its own ideal use and Corvette application, these questions typically boil down to which exhaust is right for each customer. To try and help clear up some of the confusion, and to help you decide if or which Billy Boat exhaust system is right for you, we wanted to address the benefits and characteristics of each one.
For the C6 Corvette, and especially the C6 Z06 and ZR1, the Billy Boat Fusion Exhaust is the undeniable favorite. This system has been so incredibly popular because it, like the stock NPP Exhaust system, is a true bi-modal exhaust. When GM designed and introduced bi-modal exhaust systems for their flagship Corvette line-up they took the automotive world by storm. These exhausts are brilliant for offering a more tame and quiet driving experience at lower RPM ranges, while also opening up their valves for a wide open roar under more intense, heavy acceleration, and red-line pushing driving conditions. Of course, even with that in mind, the stock mufflers designed by Chevrolet are way too restrictive for the sound most people want and expect out of their small block V8 engine.
The Fusion Exhaust provides that same bi-modal functionality with a more aggressive and race inspired tone. With the tips closed, the Fusion and the Stock exhaust are comparable. The fusion's tone is deepened and cleaner, but, it's not noticeably louder; however, when a Corvette outfitted with a Fusion Exhaust opens up, the sound is unmistakable. The Fusion provides a hearty, muscle-car tone when wide open that is similar to the B&B Bullet exhaust, only a little bit quieter. This is achieved through the use of shortened Fusion mufflers that provide a more free-flowing and resonant exhaust.
The Fusion is also a brilliant exhaust because it allows for C6 Corvettes that did not opt for the NPP stock exhaust to upgrade to a complete bi-modal system. Billy Boat sells their Fusion with a complete bi-modal upgrade kit that comes with all of the necessary attachments to turn your single mode Corvette in to a vacuum controlled bi-modal machine.
The Fusion is available for all C6 Corvette models in various forms:
For 2005-08 C6 Corvettes the Billy Boat Fusion comes in a 2.5" system complete with full NPP set-up. Pricing and ordering information available here: C6 Corvette Billy Boat Fusion Complete Kit
For 2009 and newer C6 Corvettes without the stock NPP, the Fusion Exhaust is available with all necessary NPP set-up equipment as well. Pricing and ordering information available here: C6 Billy Boat Fusion Complete Kit
For 2009 and newer Corvettes that are already outfitted with the bi-modal NPP exhaust but want to upgrade over the stock mufflers, there is a Fusion Exhaust for you as well. Pricing and ordering information available here: C6 NPP B&B Fusion Exhaust
Finally, for Z06 and ZR1 C6 Corvettes, there is a 3" Billy Boat Fusion Exhaust for you as well to help you upgrade your restrictive stock mufflers to the more powerful and free-flowing Billy Boat alternative. Pricing and ordering information available here: C6 Z06 and ZR1 Fusion Exhaust
Video and Sound Clip of the Fusion Exhaust on a C6 Z06 is available here.
For some people, however, the bi-modal exhaust functionality is not ideal. If you're one of those people, then the very original and very clean straight-through exhaust design of the Billy Boat Bullet exhaust may be perfect for you. The Bullet is one of the most, if not the single most, aggressive exhaust systems on the market for the C6 Corvette today. Designed to optimize exhaust flow for peak performance numbers and the most powerful and throaty exhaust tone, the Bullet is as loud and as powerful an exhaust as there is.
The Bullet utilizes a very classic muscle-car design with straight-through high-flowing mufflers that provide a deep and throaty resonance for a very classic muscle car tone. The crescendo through the RPM range with the Bullet exhaust is one of volume and strength that harkens back to the classic American muscle car age with thunder and bravado; of course, the C6 Corvette-with all of its technological improvements and incredible power numbers-is anything but an old muscle car, and Billy Boat was able to design the Bullet to truly pay tonal homage to the Corvettes of the 60's and 70's, while also still holding true to the modern Corvette's undeniable race pedigree.
For a Corvette enthusiast that not only doesn't mind loud, but feeds and thrives off of it, the Bullet exhaust may be perfect for you. If you're not afraid of drone, or of rattling the windows of your neighbor's home when you start your 'Vette up in the morning, then you may want to check out the Bullet. Just as the Fusion is designed and modified to specifically meet the needs of each model and generation C6 Corvette, so is the Bullet.
For 2005-08 Corvettes check out the Billy Boat C6 Bullet Exhaust System.
For 2009 and newer base C6 Corvettes check the B&B Corvette C6 Bullet out on our website here.
For C6 Z06 and ZR1 Corvettes, you can find find pricing and ordering information for the Z06 and ZR1 Billy Boat Bullet exhaust here.
If you prefer the straight-through exhaust design, but aren't a fan of Cabin Drone or excessive noise like you would expect with a Bullet exhaust, then Billy Boat's newest exhaust design, the PRT System, would be perfect for you. The PRT, which stands for Purge Resonance Technology, is a masterpiece of engineering and design brought to you by Billy Boat. This complete redesigned and reengineered exhaust for the C6 Corvette is the latest in Billy Boat's history of designing powerful exhaust tones with drone control in mind.
The PRT offers a more subdued touring tone at regular driving speeds than the Bullet, with a more race-inspired straight-through tone and design than the Fusion. This results in greater HP and Torque gains across the entire RPM band--Dynos on some C6 Corvettes have reported as much as 18hp, with 14-15 being a commonly achieved norm. The Purge Chamber technology helps keep the exhaust mellow at cruising speeds but allows it to open up for a very aggressive and powerful tone under more extreme driving conditions that is similar to the Bullet in quality. Where the PRT separates itself from the Bullet, however, is in its minimal Cabin Drone. "Drone" has become a no-no for modern exhausts and a dangerous word around the forum community, we know, and Billy Boat took that to heart when designed this exhaust. For the powerful tone and volume this system puts out, the drone is absolutely minimal. What this gives is a straight-through exhaust that sounds beautifully, and couples perfectly with automatic or paddle shifter Corvettes, as well as those with complete Long Tube header packages.
For 2005-08 C6 Corvettes, check out our web listing on the Billy Boat C6 Corvette PRT Exhaust for more information and ordering.
For the 2009 and newer C6 Corvettes, check out the following listing for pricing and ordering information:Billy Boat Corvette PRT Exhaust.
If you drive a Z06 or ZR1 and this exhaust sounds ideal for you, check out the C6 Corvette Z06 and ZR1 B&B PRT Exhaust System.
Of course, Billy Boat doesn't stop with all of these options either. Each and every Billy Boat exhaust for the C6 Corvette is available in your choice of Quad Round and Quad Oval Exhaust tips. These tips are all manufactured from the highest quality polished stainless steel for a beautiful and aggressive visual finish that will match your vehicle's new found tonal and performance benefits. If Polished Stainless Steel isn't your bag, Billy Boat exhaust tips are also now available in hand-dipped Black Satin finish. This provides your Corvette with a very unique aftermarket appearance that, when coupled with an exhaust filler plate or panel, can make for a gorgeous offset look. They also look especially great on blacked-out C6 Corvettes going for the Bat-mobile style.
All Billy Boat Exhausts are also available with a Billy Boat X-Pipe. An aftermarket X-Pipe from Billy Boat will help increase exhaust flow even further by replacing the restrictive and archaic stock H-Pipe design. X-Pipes also work to even out exhaust flow and remove the Deceleration Popping noise that many Corvette owners know and dread. For information on Billy Boat X-Pipes please refer to our website, or give us a call at our office and we can make sure to get the perfect one for your needs.
If there are any other questions you may have about the Billy Boat systems above, or about any other Billy Boat product (or any product we carry here at Southern Car Parts) please do not hesitate to ask. Give us a call at our office at (770)919-1433 and we'll do our best to answer your questions and help you outfit your C6 Corvette as best as possible.
Please click links above for pricing and ordering information.
Thanks,
Matt
11-16-2011, 11:37 PM
#2
Instructor
Member Since: Apr 2007
Location: Central Valley California
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
I already have the B&B Fusion on my 08 NPP and absolutely love it! The look, the sound, no exhaust is better for me (others will disagree, that’s why I made the point of saying "Me"). Great price too. Just out of curiosity why didn’t you just list one price if they are all the same?
11-16-2011, 11:43 PM
#3
There is no equal in exhaust.
The system I had on my old C5 developed a tiny crack on one side and I wanted to send it back and get it fixed,,,so I called them and told them about the crack. With no pressuring them, they sent me an entire new system at no cost !!!!!!!!!!!!!!!!!!!!!! and never asked for the cracked side be returned.....I WAS SOLD THAT DAY and now have em on my C6
The system I had on my old C5 developed a tiny crack on one side and I wanted to send it back and get it fixed,,,so I called them and told them about the crack. With no pressuring them, they sent me an entire new system at no cost !!!!!!!!!!!!!!!!!!!!!! and never asked for the cracked side be returned.....I WAS SOLD THAT DAY and now have em on my C6
11-23-2011, 10:46 PM
#4
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,618
Received 314 Likes
on
287 Posts
St. Jude Donor '06-'07, '13, '15
I already have the B&B Fusion on my 08 NPP and absolutely love it! The look, the sound, no exhaust is better for me (others will disagree, that’s why I made the point of saying "Me"). Great price too. Just out of curiosity why didn’t you just list one price if they are all the same?
Thanks,
Matt
12-05-2011, 06:23 PM
#5
Team Owner
Member Since: Mar 2007
Location: Right Corner Pocket of Illinois
Posts: 32,260
Received 1,491 Likes
on
1,005 Posts
No-IL Events Coordinator
2020 C6 of the Year Finalist - Unmodified
2020 Corvette of the Year Finalist (appearance mods)
C6 of Year Winner (appearance mods) 2019
2018 C6 of Year Finalist
St. Jude Donor '12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
What is the claimed HP/TQ bump for the BB Fusion on Z06???
12-28-2011, 05:11 PM
#7
Le Mans Master
I have the Fusions on my 06Z but the flaps won't close. I don't think I have the valve controls for the vacuum. Do you sell that part of it separately? Is there any way to find out if the vacuum controls is on the car? Where to look and what to look for?
Thanks
Thanks
01-02-2012, 10:40 PM
#8
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,618
Received 314 Likes
on
287 Posts
St. Jude Donor '06-'07, '13, '15
They come with the actuators already installed on the exhaust. When you say Valve controls are you talking about the ability to manually open and close them on command?
By default the Fusions work exactly like the OEM Z06 exhaust and the flaps open at 3500rpm.....
Let me know,
Jim
By default the Fusions work exactly like the OEM Z06 exhaust and the flaps open at 3500rpm.....
Let me know,
Jim
01-20-2012, 02:27 PM
#9
Race Director
Bob, I've got the B&B PRT's on my Z, and Jimmy P has the Bullets on his. When spring gets here , we can get together and you can listen in person. I don't think they do much in the area of increased HP/TQ, whatever little there is you won't feel it in our cars.
There is another guy, Bruce I believe that is Arlington Heights, he's got the Fusions on his Z.
B&B to me is the best exhaust kits, sound, quality look and everything, I had used PRT's on my C5 and they sounded awesome.
The PRT's on the C6Z I have sound great too. One of my favorite things about their kits are the tips, they are huge and fill out the back of the car nicely
Pfrank took a video of my car with the PRT's when I got them last year, it was on Youtube but not sure if its still out there.
There is another guy, Bruce I believe that is Arlington Heights, he's got the Fusions on his Z.
B&B to me is the best exhaust kits, sound, quality look and everything, I had used PRT's on my C5 and they sounded awesome.
The PRT's on the C6Z I have sound great too. One of my favorite things about their kits are the tips, they are huge and fill out the back of the car nicely
Pfrank took a video of my car with the PRT's when I got them last year, it was on Youtube but not sure if its still out there.
Last edited by FrankTank; 01-20-2012 at 02:29 PM.
02-01-2012, 09:16 PM
#11
Melting Slicks
Bob, I've got the B&B PRT's on my Z, and Jimmy P has the Bullets on his. When spring gets here , we can get together and you can listen in person. I don't think they do much in the area of increased HP/TQ, whatever little there is you won't feel it in our cars.
There is another guy, Bruce I believe that is Arlington Heights, he's got the Fusions on his Z.
B&B to me is the best exhaust kits, sound, quality look and everything, I had used PRT's on my C5 and they sounded awesome.
The PRT's on the C6Z I have sound great too. One of my favorite things about their kits are the tips, they are huge and fill out the back of the car nicely
Pfrank took a video of my car with the PRT's when I got them last year, it was on Youtube but not sure if its still out there.
There is another guy, Bruce I believe that is Arlington Heights, he's got the Fusions on his Z.
B&B to me is the best exhaust kits, sound, quality look and everything, I had used PRT's on my C5 and they sounded awesome.
The PRT's on the C6Z I have sound great too. One of my favorite things about their kits are the tips, they are huge and fill out the back of the car nicely
Pfrank took a video of my car with the PRT's when I got them last year, it was on Youtube but not sure if its still out there.
Does the B&B Z06 PRT's system sound the same as the Fusion, with the valve open? Is the only different between the two system is the valves?
02-01-2012, 10:05 PM
#12
Team Owner
I want a nice system but I'm affraid of drone or anything too loud. I like the PRT z06 system but how would it rank on the sound level. If it is any where near the stock with valves open, then no thanks. I want quiet but good performance.
02-06-2012, 04:14 PM
#13
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,618
Received 314 Likes
on
287 Posts
St. Jude Donor '06-'07, '13, '15
Thanks,
Dave
02-07-2012, 04:58 PM
#14
Melting Slicks
The PRT system doesn't sound the same as the Fusion, but they're reasonably similar systems. Think of the PRT as a version of the Bullet system designed not to drone very much, so while it isn't the same as a non-dual-mode Fusion the end result is fairly similar.
Thanks,
Dave
Thanks,
Dave
11-03-2013, 03:41 PM
#15
Finally got my B&B PRT exhaust stuck on my '13 GS. I love the sound when going through the gears but when on the highway you do not hear a thing on the inside. Would like to get it a little louder so I may get the B&B center pipe without the cats (no check hear in OK).
Oh and I got this exhaust from Southern because of the great price and quick service.
Oh and I got this exhaust from Southern because of the great price and quick service.
11-04-2013, 02:54 PM
#16
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,618
Received 314 Likes
on
287 Posts
St. Jude Donor '06-'07, '13, '15
Finally got my B&B PRT exhaust stuck on my '13 GS. I love the sound when going through the gears but when on the highway you do not hear a thing on the inside. Would like to get it a little louder so I may get the B&B center pipe without the cats (no check hear in OK).
Oh and I got this exhaust from Southern because of the great price and quick service.
Oh and I got this exhaust from Southern because of the great price and quick service.
11-20-2013, 08:03 PM
#17
Cruising
exhaust
How do these exhausts sound inside the cabin. I love the sound of these custom exhausts, but enjoy the quiet cabin. Wondering if having both are possible.
11-20-2013, 08:32 PM
#18
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,618
Received 314 Likes
on
287 Posts
St. Jude Donor '06-'07, '13, '15
I'd suggest the BB PRT system...great sound when your really in the gas, but stock sounding during cruising. What year is your Corvette?
11-20-2013, 10:59 PM
#19
Cruising
05, This one is my first. The BB PRT sounds like something that might interest me. I'll see if I can find something on youtube. Thanks
