*HELP* - C6 LED Tail lights
07-28-2013, 10:51 AM
#41
Tech Contributor
Yep we tint them. 
http://forums.corvetteforum.com/c6-p...hips-free.html
I also have my own custom red set coming out that is a tad darker than the way they come from the factory. I just finished a set yesterday and will be posting those soon.
http://forums.corvetteforum.com/c6-p...hips-free.html I also have my own custom red set coming out that is a tad darker than the way they come from the factory. I just finished a set yesterday and will be posting those soon.
02-28-2014, 06:09 PM
#42
JW - I bought a set from you last month but have not gotten the time to install them. Mine don't have 1s and 2s markings. Should I just put the Rs on right side and Ls on left side? Also, where to tap the resistor?
02-28-2014, 06:25 PM
#43
Banned Scam/Spammer
Member Since: Feb 2007
Location: Oklahoma City
Posts: 50,094
Received 265 Likes
on
253 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
Correct R's on the right and L's on the left. There is no 1 and 2 on the sets we sell.
You don't have to tap into anything with those. Just peel that red paper off and stick them to the inside of the rear fascia. Check out the install pdf here:
http://www.shop.jwmotoring.com/C6-LE...TailLights.htm
You don't have to tap into anything with those. Just peel that red paper off and stick them to the inside of the rear fascia. Check out the install pdf here:
http://www.shop.jwmotoring.com/C6-LE...TailLights.htm
02-28-2014, 06:26 PM
#44
Banned Scam/Spammer
Member Since: Feb 2007
Location: Oklahoma City
Posts: 50,094
Received 265 Likes
on
253 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
One more thing. Be sure to remove the OEM bulb. That plug (black connector with green and black wires) will go where the bulb was.
04-25-2016, 12:15 PM
#45
Racer
C6 Eagle SINGLE LED tail light?
I know I am not the only one with this issue so I am reaching out to help each other.
I have a set of Eagle LED Tail lights installed. One stopped working. I need to find and buy one tail light. They are not to be found as a single unit anywhere.
Does anyone have an extra one I can buy? Maybe there is some others who need just one? We can buy a set and split? Thoughts?
I have a set of Eagle LED Tail lights installed. One stopped working. I need to find and buy one tail light. They are not to be found as a single unit anywhere.
Does anyone have an extra one I can buy? Maybe there is some others who need just one? We can buy a set and split? Thoughts?
09-24-2016, 02:51 PM
#46
Intermediate
09-24-2016, 10:19 PM
#47
Drifting
09-24-2016, 11:27 PM
#48
Intermediate
09-24-2016, 11:42 PM
#49
Tech Contributor
I'm not sure why the website is still up. Maybe he is just going to ignore it and cancel any orders, unless he has some leftover stock somewhere.
Either that or he will only ship items where he is the middleman and he doesn't have to do anything.
He hasn't been on he forum in quite a while.
.
My car is used in many of his photos for LED tail lights on his website.
.
Last edited by ncvette_1FUNRIDE; 09-24-2016 at 11:44 PM.
09-25-2016, 06:37 PM
#50
I would not buy anything from the website. I got in touch with Jhonathan last week via email and he basically told me that he has a new career (not Corvette related) and if he did anything Corvette related, it would be part time, after hours and it could take weeks for him to find time to complete a 'custom' order. He hasn't tinted any LED tail lights in over 2 years.
I'm not sure why the website is still up. Maybe he is just going to ignore it and cancel any orders, unless he has some leftover stock somewhere.
Either that or he will only ship items where he is the middleman and he doesn't have to do anything.
He hasn't been on he forum in quite a while.
.
My car is used in many of his photos for LED tail lights on his website.
.
I'm not sure why the website is still up. Maybe he is just going to ignore it and cancel any orders, unless he has some leftover stock somewhere.
Either that or he will only ship items where he is the middleman and he doesn't have to do anything.
He hasn't been on he forum in quite a while.
.
My car is used in many of his photos for LED tail lights on his website.
.
09-25-2016, 09:58 PM
#51
Drifting
I dont know why he has any of his websites still up I just know hes done with it for now. Lets hope he comes back as he was a standup guy and carried good quality products.
09-26-2016, 02:16 PM
#52
Drifting
I was in line twice and finally gave up. I'm sure with all the products out there you could find someone to do something like that. I just went with the regular Eagle Eye's.
09-28-2016, 03:44 PM
#53
Drifting
Just buy a set of Eagle Eyes, find a reputable paint and body ans all they have to do is add a little black to some clear and spray the tail lights. It's what Jhonathan had done for customers.
09-28-2016, 04:04 PM
#54
Melting Slicks
I must have just gotten lucky. I installed Eagle Eyes on my '09 several months ago and didn't even notice the R or L or 1 or 2 on them. Took the first two out of the box and installed them on the driver's side and the next two went on the passenger side. So far no problems. BTW, IIRC mine came from CorvetteMods and were $249.
09-29-2016, 12:25 AM
#55
Melting Slicks
Member Since: Dec 2014
Location: Bossier City Louisiana
Posts: 2,257
Received 431 Likes
on
356 Posts
I must have just gotten lucky. I installed Eagle Eyes on my '09 several months ago and didn't even notice the R or L or 1 or 2 on them. Took the first two out of the box and installed them on the driver's side and the next two went on the passenger side. So far no problems. BTW, IIRC mine came from CorvetteMods and were $249.
