Installed my new headlight lenses! Lots of before/after pics!
#41
i did mine at my friend auto shop repair, we lift the car up, removed the front fascia and loosen the fenders, we used heat gun to remove the lens, all done on one day, next day everything reinstalled, looks nice,except at night when the lights turn on, there is a fog spot on both sides, i don't know what went wrong but they look much better then before.
lens purchased from RLSEBRING
lens purchased from RLSEBRING
Last edited by Alsaadi; 04-07-2013 at 08:27 AM. Reason: correction
#42
Safety Car
Thread Starter
i did mine at my friend auto shop repair, we lift the car up, removed the front fascia and loosen the fenders, we used heat gun to remove the lens, all done on one day, next day everything reinstalled, looks nice,except at night when the lights turn on, there is a fog spot on both sides, i don't know what went wrong but they look much better then before.
lens purchased from RLSEBRING
lens purchased from RLSEBRING
#43
Supporting Vendor
Member Since: Sep 2007
Location: Pensacola Florida GO GATORS!!! www.rlsebring.com www.c6c7vette.com
Posts: 11,216
Received 174 Likes
on
92 Posts
St. Jude Donor '17
Outgassing is always a possiblity but with the recommended adhesive it's eliminated by 95%. Those cases I've heard of is usually very minor.
Since using this adhesive I have replaced well over 1000 lens and not had one outgas, at least not in my care or reported.
Since using this adhesive I have replaced well over 1000 lens and not had one outgas, at least not in my care or reported.