Race Ramps Mother's Day Special on 2-Stage Incline and Progressive Incline Ramps
#1
Former Vendor
Thread Starter
Member Since: Oct 2010
Location: Philadelphia PA
Posts: 1,250
Likes: 0
Received 53 Likes
on
45 Posts
Race Ramps Mother's Day Special on 2-Stage Incline and Progressive Incline Ramps
Now through May 13, 2012 you can save about 5% on our custom 72 and 87 Two-Stage incline Race Ramps or our 89 and 99 Progressive Incline Race Ramps. Get your wife or mother these ramps and she will remember your thoughtfulness with a smile every time you ask her to borrow the ramps.
Two-Stage Incline and Progressive Incline Race Ramps are for cars with a very low approach angle that cant clear the 10.7˚ incline on standard Race Ramps service ramps.
The RLL-72-2 ramps are 72" long by 12" wide by 8" high. The RLL-87-2 are 87" long by 14" wide by 10" high. Both models are the equivalent of standard Race Ramps with optional XTenders. These ramps have an initial incline of 6.8˚ that transitions to 10.7˚ mid-way up the ramp.
The RLL-89-2 are 89" long by 14" wide by 8" high. The RLL-99-2 ramps use the same 8" high platform but the incline section is 10" longer bring the total length to 99". The RLL-89-2 has an initial incline of 4˚ and the RLL-99-2 has an initial incline of 3.4˚. Both ramps have a curved top which sweeps up to an 8˚ incline by the time it reaches the platform. The curved top accommodates very low cars but still keeps the length of the ramp manageable.
All of these custom Race Ramps are a two-piece design. The 2-stage incline ramps are also available with the Heavy Duty option which increase the capacity from 3000 pounds per pair to 5000 pounds per pair.
Scroll down to the bottom of the page at this link for the Mother's Day Special.
http://www.reverselogic.us/ReverseLo.../Specials.html
Two-Stage Incline and Progressive Incline Race Ramps are for cars with a very low approach angle that cant clear the 10.7˚ incline on standard Race Ramps service ramps.
The RLL-72-2 ramps are 72" long by 12" wide by 8" high. The RLL-87-2 are 87" long by 14" wide by 10" high. Both models are the equivalent of standard Race Ramps with optional XTenders. These ramps have an initial incline of 6.8˚ that transitions to 10.7˚ mid-way up the ramp.
The RLL-89-2 are 89" long by 14" wide by 8" high. The RLL-99-2 ramps use the same 8" high platform but the incline section is 10" longer bring the total length to 99". The RLL-89-2 has an initial incline of 4˚ and the RLL-99-2 has an initial incline of 3.4˚. Both ramps have a curved top which sweeps up to an 8˚ incline by the time it reaches the platform. The curved top accommodates very low cars but still keeps the length of the ramp manageable.
All of these custom Race Ramps are a two-piece design. The 2-stage incline ramps are also available with the Heavy Duty option which increase the capacity from 3000 pounds per pair to 5000 pounds per pair.
Scroll down to the bottom of the page at this link for the Mother's Day Special.
http://www.reverselogic.us/ReverseLo.../Specials.html