2012 Z06 w/ Z07 Package & Hennessey HPE750
#1
Former Vendor
Thread Starter
2012 Z06 w/ Z07 Package & Hennessey HPE750
Just a few moments ago, we delivered a very unique vehicle to a local customer and wanted to share the photos of the vehicle. The vehicle was purchased brand new from Champion Chevrolet in Houston, TX and shipped directly to our location for a performance upgrade. The uniqueness is that this vehicle is a 2012 Chevrolet Corvette Z06 with the Z07 Package Add on. From what the data provided to us is that this is a complete Corvette ZR1 chassis and body, except the Carbon had to be painted and it features the LS7 Z06 engine versus the LS9 ZR1 Engine. Hands down, the vehicle is simply stunning and sure you will agree when you see these photos.
Once the vehicle arrived to our facility, we got to work on increasing the performance of the vehicle to a new level. Performance was increased by our location from 505bhp to 750bhp with the use of the following items:
• Hennessey Roots-Type Supercharger System
• High Flow Air Induction
• Forged Low Compression Pistons
• Forged Crankshaft
• High Flow Cylinder Heads
• HPE700 Camshaft Upgrade
• High Flow Fuel Injectors
• Stainless Steel Long Tube Headers
• High Flow Catalytic Converters
• Stainless Steel Mid-Pipes
• 160 Degree Thermostat
• All Necessary Gaskets, Fluids & Hardware
• Professional Installation
• HPE Engine Management Calibration
• Dyno Tuning & Road Testing
• Hennessey Premium Floormats
• Hennessey Carbon Fiber Door Sills
• Serial-Numbered Dash & Engine Plaques
• Hennessey Exterior Badging
• 3 yr / 36,000 Mile Limited Warranty
Look forward to everyone's thoughts on this vehicle. Definitely a very power and unique vehicle. If you have any questions, do not hesitate to email me personally or post here.
Have a great day,
James
Once the vehicle arrived to our facility, we got to work on increasing the performance of the vehicle to a new level. Performance was increased by our location from 505bhp to 750bhp with the use of the following items:
• Hennessey Roots-Type Supercharger System
• High Flow Air Induction
• Forged Low Compression Pistons
• Forged Crankshaft
• High Flow Cylinder Heads
• HPE700 Camshaft Upgrade
• High Flow Fuel Injectors
• Stainless Steel Long Tube Headers
• High Flow Catalytic Converters
• Stainless Steel Mid-Pipes
• 160 Degree Thermostat
• All Necessary Gaskets, Fluids & Hardware
• Professional Installation
• HPE Engine Management Calibration
• Dyno Tuning & Road Testing
• Hennessey Premium Floormats
• Hennessey Carbon Fiber Door Sills
• Serial-Numbered Dash & Engine Plaques
• Hennessey Exterior Badging
• 3 yr / 36,000 Mile Limited Warranty
Look forward to everyone's thoughts on this vehicle. Definitely a very power and unique vehicle. If you have any questions, do not hesitate to email me personally or post here.
Have a great day,
James
#6
Melting Slicks
Great Ride!!!
Often wondered what calculations or measurement method goes into determining BHP with the engine in the car. Do you have a means of measuring, or??
Often wondered what calculations or measurement method goes into determining BHP with the engine in the car. Do you have a means of measuring, or??
#10
Burning Brakes
#14
The Consigliere
Member Since: May 2006
Location: 2023 Z06 & 2010 ZR1
Posts: 22,247
Received 5,444 Likes
on
2,270 Posts
#16
Former Vendor
Thread Starter
Hennessey Performance has joined forces with Edelbrock on the Corvettes to offer a solution to those who were looking to supercharge their vehicle without having to change the hood or use a Centrifugal Unit. We have had great results with their units for over 2 years with other vehicles and glad to have them on the Corvette's now. The Edelbrock EForce logo is not on the unit and is instead our Hennessey Logo engraved into the unit.
#18
Former Vendor
Thread Starter
#19
Update
This car is now in the possession of a family member of mine. It currently only has about 15,000 miles and is still in fantastic condition.
A pic
A pic
Last edited by N+1; 09-15-2023 at 06:32 PM.