Who makes the best CF side skirts for a GS?
#1
Racer
Thread Starter
Who makes the best CF side skirts for a GS?
I am considering putting side skirts on my GS and am asking forum members who have purchased carbon fiber ones from preferably forum vendors, who has the best quality and pricing?
Thanks in advance,
Billy
Thanks in advance,
Billy
#2
Race Director
Member Since: May 2006
Location: SOFLA
Posts: 12,973
Received 1,013 Likes
on
599 Posts
2016 Corvette of Year
2015 C6 of Year Finalist
You will get varied replies. I have the carbon fiber RPI ones. The weave was excelllent as was the shine in the clear.
Other ones that are quality but considerably more expensive are
APR
Katech
APSIS
Other ones that are quality but considerably more expensive are
APR
Katech
APSIS
#5
Tech Contributor
#6
great question OP, also whats the installation process
#7
Banned Scam/Spammer
Member Since: Feb 2007
Location: Oklahoma City
Posts: 50,094
Received 265 Likes
on
253 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
Highest quality? LG's http://www.shop.jwmotoring.com/produ...&categoryId=69
Last edited by JW Motorsports; 12-06-2012 at 12:35 PM.
#8
Tech Contributor
- Put the car on jackstands
- Remove the wheels
- Loosely install the rear gurney flap
- Attach the skirt to the rear gurney flap and at the front
- Locate the skirt against the rocker panel and drill the center hole (yes, you get to drill the rocker panel)
- Install the screw/bolt that secures the skirt to the rocker panel in the hole you just drilled
- Continue drilling and installing the bolts working from the center out
A mix of photo's but you'll get it...
- Remove the wheels
- Loosely install the rear gurney flap
- Attach the skirt to the rear gurney flap and at the front
- Locate the skirt against the rocker panel and drill the center hole (yes, you get to drill the rocker panel)
- Install the screw/bolt that secures the skirt to the rocker panel in the hole you just drilled
- Continue drilling and installing the bolts working from the center out
A mix of photo's but you'll get it...