MannyS

I was just given a set of 4LT take off seat covers & inserts from a 2011 and I want to install them on my 1LT 2011. Not sure if they will fit.

Seats from donor car look the same physically as 1LT seats.

Rich Mickol

Not sure but I believe a 1LT seat is not the Sport Seat. I have a 2012GS w/2LT and mine are not Sport Seats.

I'm sure there must a difference since the Sport Seats have adjustable side bolsters and lumbar in addition to heat.

Hopefully someone will chime in. I'm sure they'll make a nice addition if they fit. Good Luck

hig4s

2011 the sport seats came on the 2LT but they did not have heat.
2013 I believe the sport seats came on the 1LT, and no clue what they did in 2012.

ncvette_1FUNRIDE

You can certainly make it work. I'm not sure if the seat back foam on the 1LT is two pieces (an outer and middle piece) or if it is one piece.

Once you take one of the seats out of the car and the seat cover off the back, you will know. If it is two pieces you should be good to go with the swap. If the seat back foam is all one piece, then you would have to order the 2 foam pieces to proceed.

You can call Kevin @ Partstaxi.com and he can give you a price on the seat back foam pieces that would work if needed.

I have a 2010 2LT and did a 2012 4LT seat conversion.

Here is a thread on what was involved.

http://forums.corvetteforum.com/c6-c...s-of-pics.html

MannyS

Thanks guys. Will try the swap tomorrow.

doubledsyellow

Seat bottoms will work seat backs will not. You have one piece seat backs now. I believe you need the two piece seat back( outer with insert)

MannyS

I have the 4LT outer seat covers, perforated inserts and foam.