When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
there should be a small rectangular metal plate affixed to the intake manifold under the plastic cover. Should be on the right (passenger side) rear area.
mine is currently under a cover in storage otherwise I would go and get a picture for you.
I figure this is a long shot, but I would like to find a '13 427 Die-cast Model. My preferences would be around 1:18th scale with the cup wheels. I have exhausted all the searches I am aware of including NCM. Has anyone ever seen one? If so, any ideas where I might be able to get my hands on one? Thanks in advance!
I figure this is a long shot, but I would like to find a '13 427 Die-cast Model. My preferences would be around 1:18th scale with the cup wheels. I have exhausted all the searches I am aware of including NCM. Has anyone ever seen one? If so, any ideas where I might be able to get my hands on one? Thanks in advance!
I've been looking too, seems to me it would be popular.
Okay. So the wife and I were sitting on the patio yesterday after I washed the Vette, and she looked in the garage at it and said "what's that part between the exhaust? the silver thing. It looks dirty or rusty or something". Okay. Great. Now I'm obsessed with doing something to hide it since I don't have a lift or any way of getting under it to polish it (I'm 72 years old). Does anyone make an exhaust enhancer or plate that fits the NPP? Links? Seems like every one I've seen just fits a regular C6.
Thanks.
Okay. So the wife and I were sitting on the patio yesterday after I washed the Vette, and she looked in the garage at it and said "what's that part between the exhaust? the silver thing. It looks dirty or rusty or something". Okay. Great. Now I'm obsessed with doing something to hide it since I don't have a lift or any way of getting under it to polish it (I'm 72 years old). Does anyone make an exhaust enhancer or plate that fits the NPP? Links? Seems like every one I've seen just fits a regular C6.
Thanks.
see the postings in the C6 General area for enhancer plates............... Dennis will provide you one, look great, fit the NPP system, fairly priced, great quality, easy to install............ have one on mine, link to topic below..................
see the postings in the C6 General area for enhancer plates............... Dennis will provide you one, look great, fit the NPP system, fairly priced, great quality, easy to install............ have one on mine, link to topic below..................
2 questions. Where would be the best place to get side skirts that match the factory painted front splitter? Second, I've noticed the passenger side front sits lower than the driver side as can be seen the attached pics (somewhat). I'm going to check to see if it was maybe lowered on the factory bolts or something, but is there a good chance its the shock? If so, is it the exact same as the ones found on any of the Z06's that came with the MSRC? Where would be the best place to get a replacement (if needed) and what is the part number?
2 questions. Where would be the best place to get side skirts that match the factory painted front splitter? Second, I've noticed the passenger side front sits lower than the driver side as can be seen the attached pics (somewhat). I'm going to check to see if it was maybe lowered on the factory bolts or something, but is there a good chance its the shock? If so, is it the exact same as the ones found on any of the Z06's that came with the MSRC? Where would be the best place to get a replacement (if needed) and what is the part number?
Thank you in advance!
My passengers side is lower, about 1/2". Actually it's more right now due to being jacked up for a flat tire.
I also recently purchased one. Bought from a forum member. #1470 in Night Race Blue w/engine built by Bryan Briones
07-26-2018, 09:10 PM
Found the Build plate...
