Hammy's Grand Sport Bar & Grill
Safety Car
Member Since: Aug 2004
Location: Southwest Kansas
Posts: 4,767
Received 538 Likes
on
286 Posts
2022 Corvette of the Year Finalist -- Unmodified
2021 C6 of the Year Winner - Unmodified
H1 isn't kidding about meeting one of NE finest! Hehe
Safety Car
Member Since: Nov 1999
Location: Green and Wet Western Oregon
Posts: 4,109
Received 920 Likes
on
465 Posts
2023 C7 of the Year Winner - Unmodified
2018 C6 of Year Winner
Glad to hear you are home safely! Now get that window fixed!
So, the old girl did okay and got some thumbs up on her cross-country journey? I gotta say, I thought you were nuts when you first told me your plan. And after meeting you, my thoughts were confirmed - you ARE nuts!! But in a good way.
ps - about that Oregon plate...........I think I left a matched set of 1956 Oregon plates under the back seat. I'll trade you back-seat trim pieces for those two plates.
So, the old girl did okay and got some thumbs up on her cross-country journey? I gotta say, I thought you were nuts when you first told me your plan. And after meeting you, my thoughts were confirmed - you ARE nuts!! But in a good way.
ps - about that Oregon plate...........I think I left a matched set of 1956 Oregon plates under the back seat. I'll trade you back-seat trim pieces for those two plates.
The following users liked this post:
teebee (07-22-2018)
Race Director
Member Since: Jan 2014
Location: Huskerland
Posts: 10,531
Received 2,828 Likes
on
1,968 Posts
2021 C6 of the Year Finalist - Modified
Ya Ducky I will send them all back to you...... I am have began looking for a nice Neb 56 plate that will say The Beef State..... Will send those to ya soon real soon.......first I gotta get the one off the car.....its fastened on real good....... you must have run out of phillips head screws......
Race Director
Member Since: Mar 2010
Location: T-Town WA
Posts: 15,101
Received 3,628 Likes
on
2,349 Posts
2016 C6 of Year Finalist
Safety Car
Member Since: Aug 2004
Location: Southwest Kansas
Posts: 4,767
Received 538 Likes
on
286 Posts
2022 Corvette of the Year Finalist -- Unmodified
2021 C6 of the Year Winner - Unmodified
I'm pretty sure that is his bulletproof vest........
Safety Car
Member Since: Nov 1999
Location: Green and Wet Western Oregon
Posts: 4,109
Received 920 Likes
on
465 Posts
2023 C7 of the Year Winner - Unmodified
2018 C6 of Year Winner
Ya Ducky I will send them all back to you...... I am have began looking for a nice Neb 56 plate that will say The Beef State..... Will send those to ya soon real soon.......first I gotta get the one off the car.....its fastened on real good....... you must have run out of phillips head screws......
Race Director
Member Since: Mar 2010
Location: T-Town WA
Posts: 15,101
Received 3,628 Likes
on
2,349 Posts
2016 C6 of Year Finalist
Race Director
Member Since: Mar 2010
Location: T-Town WA
Posts: 15,101
Received 3,628 Likes
on
2,349 Posts
2016 C6 of Year Finalist
Race Director
Pro Mechanic
Member Since: Apr 2014
Location: Washington Township Michigan
Posts: 14,521
Received 3,952 Likes
on
2,470 Posts
2024 Corvette of the Year Finalist - Unmodified
2023 C6 of the Year Winner - Unmodified
2020 C6 of the Year Finalist - Unmodified
2019 C6 of Year Finalist (appearance mods)
ARP2000 is more a "brand name" than a true, proper name for steel...................... ARP2000 is very similar to 8740 steel widely used in the aerospace industry, and 4340 is a "lower grade" or steel without the higher strength properties found in others.................
has anyone checked out the new LED headlight topics? Seems to be a lot of issues and concerns about how they really work, although I still think that the angled LED's do not look too good on the contoured body lines of the C6 generation....................
here's hoping that wayback can make it another week with temps in the triple digits down there in TX..................
rained here all weekend, and supposedly continuing through the first part of this week.................... at least the grass is green
has anyone checked out the new LED headlight topics? Seems to be a lot of issues and concerns about how they really work, although I still think that the angled LED's do not look too good on the contoured body lines of the C6 generation....................
here's hoping that wayback can make it another week with temps in the triple digits down there in TX..................
rained here all weekend, and supposedly continuing through the first part of this week.................... at least the grass is green
Race Director
ARP2000 is more a "brand name" than a true, proper name for steel...................... ARP2000 is very similar to 8740 steel widely used in the aerospace industry, and 4340 is a "lower grade" or steel without the higher strength properties found in others.................
has anyone checked out the new LED headlight topics? Seems to be a lot of issues and concerns about how they really work, although I still think that the angled LED's do not look too good on the contoured body lines of the C6 generation....................
here's hoping that wayback can make it another week with temps in the triple digits down there in TX..................
rained here all weekend, and supposedly continuing through the first part of this week.................... at least the grass is green
has anyone checked out the new LED headlight topics? Seems to be a lot of issues and concerns about how they really work, although I still think that the angled LED's do not look too good on the contoured body lines of the C6 generation....................
here's hoping that wayback can make it another week with temps in the triple digits down there in TX..................
rained here all weekend, and supposedly continuing through the first part of this week.................... at least the grass is green
Race Director
Member Since: Jan 2014
Location: Huskerland
Posts: 10,531
Received 2,828 Likes
on
1,968 Posts
2021 C6 of the Year Finalist - Modified
Soooo.......nice to see Hammy's is still standing....... I also see the Pappy's bottles with HogWash whiskey in them disappeared ...... so you were right Ruxy....they took the bait......and they can't tell the difference ...... I am going back to work today........ wow....... that went fast..... What an adventure though ... glad you guys were along for the ride....kinda.....
Figured out the Fiddysix was built on or around the 19th of July in 56 in Oakland California...... and then 62 years later in July we are driving it cross country....... I think that is some kinda of Carma...... get it Car.....Ma....... geez....... ok more later from the center of the country........ Only 6 weeks till Big Red Football starts....... oh yeah.........
Figured out the Fiddysix was built on or around the 19th of July in 56 in Oakland California...... and then 62 years later in July we are driving it cross country....... I think that is some kinda of Carma...... get it Car.....Ma....... geez....... ok more later from the center of the country........ Only 6 weeks till Big Red Football starts....... oh yeah.........
Team Owner
Member Since: Aug 2006
Posts: 22,998
Received 2,887 Likes
on
1,910 Posts
C6 of Year Finalist (appearance mods) 2019
ARP2000 is more a "brand name" than a true, proper name for steel...................... ARP2000 is very similar to 8740 steel widely used in the aerospace industry, and 4340 is a "lower grade" or steel without the higher strength properties found in others.................
has anyone checked out the new LED headlight topics? Seems to be a lot of issues and concerns about how they really work, although I still think that the angled LED's do not look too good on the contoured body lines of the C6 generation....................
here's hoping that wayback can make it another week with temps in the triple digits down there in TX..................
rained here all weekend, and supposedly continuing through the first part of this week.................... at least the grass is green
has anyone checked out the new LED headlight topics? Seems to be a lot of issues and concerns about how they really work, although I still think that the angled LED's do not look too good on the contoured body lines of the C6 generation....................
here's hoping that wayback can make it another week with temps in the triple digits down there in TX..................
rained here all weekend, and supposedly continuing through the first part of this week.................... at least the grass is green
Been working on getting some shade for my outdoor grilling area. Will install shade cloth in the morning. And have a roll down shade cloth to install on the west side. Gotta block that hot mid afternoon/evening sun. Eventually will add a bunch of 2x4s ............maybe this fall.
Race Director
Pro Mechanic
Member Since: Apr 2014
Location: Washington Township Michigan
Posts: 14,521
Received 3,952 Likes
on
2,470 Posts
2024 Corvette of the Year Finalist - Unmodified
2023 C6 of the Year Winner - Unmodified
2020 C6 of the Year Finalist - Unmodified
2019 C6 of Year Finalist (appearance mods)
looks very nice.................................
don't know if you should have posted a photo of the southern baser hovel though.............
the fat bodied boys from upstairs at Hammy's may think us baser's have it too good..................
don't know if you should have posted a photo of the southern baser hovel though.............
the fat bodied boys from upstairs at Hammy's may think us baser's have it too good..................
Race Director
Member Since: Mar 2010
Location: T-Town WA
Posts: 15,101
Received 3,628 Likes
on
2,349 Posts
2016 C6 of Year Finalist
Race Director
Member Since: Mar 2010
Location: T-Town WA
Posts: 15,101
Received 3,628 Likes
on
2,349 Posts
2016 C6 of Year Finalist
Team Owner
Member Since: Aug 2006
Posts: 22,998
Received 2,887 Likes
on
1,910 Posts
C6 of Year Finalist (appearance mods) 2019
Team Owner
Member Since: Aug 2006
Posts: 22,998
Received 2,887 Likes
on
1,910 Posts
C6 of Year Finalist (appearance mods) 2019
That reminds me.......the GS bar is almost out of Miller Lite and the ice machine is broken.
Someone take care of it please.
Someone take care of it please.