Vetteran04

Intend to purchase install LED DTR switchback with resistors. Need info on resistor spec. 50W at 6 ohm or 8 ohm?

Buying from Amazon:
No resistor spec listed, but I will track it down once I know the spec required.

Thanks

Sphurley

The 8ohm will pull around 1.75amps. How much will the LED pull?
The factory lamp pulls just over 2amps.
14volts / 8ohms = 1.75amps
14volts / 6ohms = 2.33amps

Vetteran04

Found the resistor spec buried on the Amazon site. 50W 6 ohms.

Should this work without hyper flash or other issues?