2006 key fob programming issues - CorvetteForum - Chevrolet Corvette Forum Discussion


C6 Corvette General Discussion
General C6 Corvette Discussion not covered in Tech
Sponsored by:
Sponsored by:

2006 key fob programming issues

Reply
 
 
 
Thread Tools Search this Thread
Old 06-19-2017, 11:49 AM   #1
ressner
Junior Member
Thread Starter
 
Member Since: Jun 2017
Location: Cape Girardeau Missouri
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Default 2006 key fob programming issues

I am trying to program a second key fob for my 2006 C6 convertible. I followed the instructions in the owner's manual but the DIC does not show anything after turning the trunk key 5 times quickly. The top is down, glove box and trunk are open, manual transmission in reverse, existing key next to shifter. DIC remains blank.
ressner is offline   Reply With Quote
Old 06-19-2017, 12:15 PM   #2
Vette_DD
CF Senior Member
Support Corvetteforum!
 
Vette_DD's Avatar
 
Member Since: May 2004
Posts: 66,590
Thanked 355 Times in 272 Posts
Default

Create another thread for it. Maybe no one saw the first 2 you created.
Vette_DD is online now   Reply With Quote
Old 06-19-2017, 12:19 PM   #3
ressner
Junior Member
Thread Starter
 
Member Since: Jun 2017
Location: Cape Girardeau Missouri
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I give up. How many threads does it take to get a reply?
ressner is offline   Reply With Quote
Old 06-19-2017, 01:03 PM   #4
unixcorn
CF Senior Member
Support Corvetteforum!
 
unixcorn's Avatar
 
Member Since: Oct 2010
Location: Rocheport Missouri
Posts: 1,482
Thanked 73 Times in 63 Posts
Default

Quote:
Originally Posted by ressner View Post
I give up. How many threads does it take to get a reply?
Take a look at the stickies at the top of the page. There are tips and tricks and FAQ links. Go to the FAQ link and find the Key fob programming instructions. It has much more info than the manual.

You can also use the Search function in one of the menu bars above. Select advanced and then put in what you want to search for and select the correct forum to search. There have been hundreds of posts on this very issue.

Maybe the switch attached to the key is disconnected or misadjusted and that is preventing the key turns from being detected by the computer. It's a start anyway.
unixcorn is offline   Reply With Quote
Old 06-19-2017, 01:10 PM   #5
ressner
Junior Member
Thread Starter
 
Member Since: Jun 2017
Location: Cape Girardeau Missouri
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by unixcorn View Post
Take a look at the stickies at the top of the page. There are tips and tricks and FAQ links. Go to the FAQ link and find the Key fob programming instructions. It has much more info than the manual.

You can also use the Search function in one of the menu bars above. Select advanced and then put in what you want to search for and select the correct forum to search. There have been hundreds of posts on this very issue.

Maybe the switch attached to the key is disconnected or misadjusted and that is preventing the key turns from being detected by the computer. It's a start anyway.
Thank you. How can you tell if the switch attached to the key is disconnected?
ressner is offline   Reply With Quote
Old 06-19-2017, 01:13 PM   #6
njk4o5
CF Senior Member
 
njk4o5's Avatar
 
Member Since: Feb 2015
Location: Boston MA
Posts: 315
Thanks: 0
Thanked 29 Times in 22 Posts
Default

ive been reading that if you go through the steps to program a key sometimes the DIC wont show anything but the key will be programmed. im having trouble with my spare im trying to program too.
njk4o5 is offline   Reply With Quote
Old 06-19-2017, 01:22 PM   #7
EVRose
CF Senior Member
 
EVRose's Avatar
 
Member Since: Oct 2010
Location: Las Vegas NV
Posts: 11,148
Thanked 344 Times in 272 Posts
Default

It's possible the key isn't turning the lock cylinder completely. Try spraying some lubricant into the keyhole to make the key turn easier.
EVRose is online now   Reply With Quote
Old 06-19-2017, 01:26 PM   #8
ressner
Junior Member
Thread Starter
 
Member Since: Jun 2017
Location: Cape Girardeau Missouri
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by njk4o5 View Post
ive been reading that if you go through the steps to program a key sometimes the DIC wont show anything but the key will be programmed. im having trouble with my spare im trying to program too.
I tried programming the key even though the DIC doesn't show anything. It did not work.
ressner is offline   Reply With Quote
Old 06-19-2017, 07:33 PM   #9
corvettezman
CF Senior Member
Support Corvetteforum!
St. Jude Donor '11-'12-'13, '15, '16-'17
 
corvettezman's Avatar
 
Member Since: Oct 2004
Location: Home of the VOLS ! Knoxville, TN. Tennessee
Posts: 10,359
Thanked 13 Times in 12 Posts
Default

When I had mine done, I had the same problem. The technician pulled the carpet where the lock is down, and pulled the wire or cable that the cylinder turns 5 times by hand.
It worked.
He said that maybe with age that wire was stretched and the when you turn the cylinder with the key , it does not pull it far enough to activate the fob programming in the DIC.
To be honest though, I don't know what he pulled. It was in the lock mechanism.
corvettezman is offline   Reply With Quote
Old 06-20-2017, 10:38 AM   #10
mogman
Junior Member
 
Member Since: Mar 2016
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I have a 2007 with a manual trans. I had the same problem and found that the trans had to be in Reverse in order for it to work. It says nothing about that in the manual.
mogman is offline   Reply With Quote
Old 06-20-2017, 12:49 PM   #11
ressner
Junior Member
Thread Starter
 
Member Since: Jun 2017
Location: Cape Girardeau Missouri
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by mogman View Post
I have a 2007 with a manual trans. I had the same problem and found that the trans had to be in Reverse in order for it to work. It says nothing about that in the manual.
Thank you. I read that a manual transmission needed to be in reverse on another website. I did that and it still doesn't work.
ressner is offline   Reply With Quote
Old 06-20-2017, 01:02 PM   #12
bmfvette
CF Senior Member
 
bmfvette's Avatar
 
Member Since: Apr 2010
Location: Vetteville Tennessee
Posts: 985
Thanked 38 Times in 35 Posts
Default

Are you sure you turing the key "stop to stop", the correct number of times within the time frame specified?
bmfvette is offline   Reply With Quote
Old 06-20-2017, 01:04 PM   #13
ressner
Junior Member
Thread Starter
 
Member Since: Jun 2017
Location: Cape Girardeau Missouri
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by bmfvette View Post
Are you sure you turing the key "stop to stop", the correct number of times within the time frame specified?
Define stop to stop. It turns around a quarter of a turn clockwise each time.
ressner is offline   Reply With Quote
Old 06-20-2017, 03:11 PM   #14
ressner
Junior Member
Thread Starter
 
Member Since: Jun 2017
Location: Cape Girardeau Missouri
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by ressner View Post
Define stop to stop. It turns around a quarter of a turn clockwise each time.
I tried removing the rear carpeted panel in the trunk to access the cable that the trunk key moves to activate the fob programming. I pulled it 5 times quickly which is essentially the same as turning the key only harder. The DIC still does not show anything.
ressner is offline   Reply With Quote
Old 06-20-2017, 06:05 PM   #15
Icecap
CF Senior Member
 
Icecap's Avatar
 
Member Since: Nov 2016
Location: Chilliwack BC Canada
Posts: 116
Thanked 21 Times in 16 Posts
Default

Quote:
Originally Posted by ressner View Post
I tried removing the rear carpeted panel in the trunk to access the cable that the trunk key moves to activate the fob programming. I pulled it 5 times quickly which is essentially the same as turning the key only harder. The DIC still does not show anything.
I hope this isn't a dumb question but how much time elapses between your 5 turn switch input and your getting to the cabin to respond? I didn't think mine worked either when i recently ran the long program.

It took my 3rd attempt before I got it to work since the timer doesn't give you much time to respond with the correct input or it cancels the set up program. You don't have enough time to walk to the drivers side, open the door, get in and respond. I had to leave the door open and sprint those few steps or it would cancel the program.
Icecap is offline   Reply With Quote
Go Back   CorvetteForum - Chevrolet Corvette Forum Discussion >
Reload this Page
  • 2006 key fob programming issues
  •  
     
    Reply

    Related Topics
    Thread Thread Starter Forum Replies Last Post
    Programming new key fob Skanlez C6 Corvette General Discussion 9 12-06-2015 02:42 PM
    Problem: FOB Programming '07 QWKSRT C6 Corvette General Discussion 23 01-17-2012 06:43 PM
    Is It Necessary To Re-Program Key Fobs On DIC After Battery Disconnect? LIGHTNING C5 Tech 11 01-14-2003 11:38 PM


    Thread Tools Search this Thread
    Search this Thread:

    Click for Advanced Search

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off

    Forum Jump


    All times are GMT -4. The time now is 09:40 PM.


     
    • Ask a Question
      Get answers from community experts
    Question Title:
    Description:
    Your question will be posted in: