When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Gauging Interest: Custom Halo LED Tail Lights for C6
I made my own set of custom halo LED tail lights for my c6 last year. They are fully functional dual intensity tail lights. Not just an outside stick on LED for looks. These replace your tail light bulbs entirely.
I posted a few pictures last year and got a bunch of people asking if I would make them or how to make them. Haven't had time until now but I would like to gauge interest in these if I was to start selling them.
The goal is to have them plug and play into your stock harness. No wiring required. These setups utilize the stock tail light housings. You can either send them to me or I am considering the possibility of stocking a few sets as well so you do not have to have down time.
Just want to gauge interest here. Let me know if you would be interested in purchasing a set, and depending on interest I will start working with wire harness suppliers.
Mods feel free to PM me with what I would need to do to become a vendor, or if i need to be a vendor or whatever to sell these.
I saw your original thread and have to say - these are WAY cool!
I think if you got ahead on four or five sets of C6 tail lights, then do a straight sale with core return will be most efficient. "Send your TLs; I'll send you the LED replacements." If so, you just need to be careful the lights you're getting are in tact and no broken tabs, etc. You can do that by requesting pics first before sending.
Only other issue I can think of is quality of the LEDs as I've seen some of the HL rings don't last, or some of the ring on the dot LEDs go dark. Maybe a question is - how easy is it to change the ring if it goes bad. I'm guessing it is similar to the headlight in terms of labor.
09-20-2017, 09:32 PM
Gauging Interest: Custom Halo LED Tail Lights for C6
