Post pics of your side skirts, splitters and deck lids on your car
11-10-2017, 11:45 PM
#1
Post pics of your side skirts, splitters and deck lids on your car
I want CF skirts and a CF deck lid but my driveway is so steep I cannot go with the ZR1 splitter. Curious to see who is running CF and gloss or all of either.
11-10-2017, 11:54 PM
#2
Seems as if you want a miracle.
If your driveway is steep, then these may not be the best way to spend your money.
Keep in mind that the first time you crack your CF splitter, you are basically screwed; you will need to replace, because fixing them is as expensive or worse if you go with visible CF.
If your driveway is steep, then these may not be the best way to spend your money.
Keep in mind that the first time you crack your CF splitter, you are basically screwed; you will need to replace, because fixing them is as expensive or worse if you go with visible CF.
11-11-2017, 12:02 AM
#3
I intend to keep the stock splitter. My goal here is to see what it would look like with CF skirts and lid.
11-11-2017, 12:05 AM
#4
My bad, I thought you wanted the splitter, too, and misread.
The following users liked this post:
Dimewise (11-11-2017)
11-11-2017, 06:13 PM
#5
Come on yall show off your vettes!
11-11-2017, 06:37 PM
#6
Melting Slicks
I plan on getting quite a bit more CF in the future including the spoiler. Hope this helps! I love the look. These are the extended side skirts as well (1" wider).
The following users liked this post:
tdf01cycling (12-13-2017)
11-11-2017, 06:54 PM
#7
Nice! Is that the standard zr1 splitter?
11-11-2017, 08:20 PM
#10
11-11-2017, 08:52 PM
#11
Looking good gentlemen, how much more does the extended splitter scrape on driveways and inclines over stock?
11-11-2017, 08:57 PM
#12
Race Director
Member Since: Mar 2011
Location: SW Florida
Posts: 13,256
Received 3,087 Likes
on
2,078 Posts
2021 C6 of the Year Finalist - Modified
11-11-2017, 09:05 PM
#13
Race Director
Pro Mechanic
Member Since: Apr 2014
Location: Washington Township Michigan
Posts: 14,521
Received 3,952 Likes
on
2,470 Posts
2024 Corvette of the Year Finalist - Unmodified
2023 C6 of the Year Winner - Unmodified
2020 C6 of the Year Finalist - Unmodified
2019 C6 of Year Finalist (appearance mods)
Extended version of the side skirts from CF Kits & performance and the front splitter is ABS plastic from WSA Auto on the big auction site.
Satin black finish on all of them, and the front splitter has about 5" of clearance from the ground,
will scrape the lower air valance underneath the car before the splitter for those who are wondering.....................
11-11-2017, 09:11 PM
#14
Extended version of the side skirts from CF Kits & performance and the front splitter is ABS plastic from WSA Auto on the big auction site.
Satin black finish on all of them, and the front splitter has about 5" of clearance from the ground,
will scrape the lower air valance underneath the car before the splitter for those who are wondering.....................
11-11-2017, 09:12 PM
#15
11-11-2017, 09:27 PM
#16
Tech Contributor
Carbon fiber front splitter, carbon fiber rear diffuser, SS Vettes ZR1 Extreme rear spoiler.
Last edited by ncvette_1FUNRIDE; 11-11-2017 at 09:27 PM.
11-11-2017, 10:02 PM
#18
Race Director
Member Since: Mar 2011
Location: SW Florida
Posts: 13,256
Received 3,087 Likes
on
2,078 Posts
2021 C6 of the Year Finalist - Modified
