Use TPP Exhaust
01-13-2018, 05:26 PM
#1
4th Gear
Thread Starter
Member Since: Oct 2009
Location: Albuquerque NM
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Use TPP Exhaust
Does anyone have a set of C6 2008 NPP mufflers they are wanting to sell? I want to install a set on my 2005 C6 and I believe 2008 C6 will work. I know I'll need to get a control module, but I'm looking for a set of NPP mufflers first.
Last edited by kamcmah; 01-13-2018 at 05:43 PM. Reason: Mistyped NPP
01-13-2018, 05:36 PM
#2
Team Owner
Nit picking.....but you mean NPP.
The mufflers and over axle pipes are one unit, each side. If you are going to use the included over axle pipes, you can only use 2008. GM changed the pipes slightly in 2009 and they won't PnP on your car. OR you can buy any year NPP, cut the mufflers off and weld them to your over axle pipes.
The mufflers and over axle pipes are one unit, each side. If you are going to use the included over axle pipes, you can only use 2008. GM changed the pipes slightly in 2009 and they won't PnP on your car. OR you can buy any year NPP, cut the mufflers off and weld them to your over axle pipes.
01-13-2018, 05:41 PM
#3
4th Gear
Thread Starter
Member Since: Oct 2009
Location: Albuquerque NM
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Nit picking.....but you mean NPP.
The mufflers and over axle pipes are one unit, each side. If you are going to use the included over axle pipes, you can only use 2008. GM changed the pipes slightly in 2009 and they won't PnP on your car. OR you can buy any year NPP, cut the mufflers off and weld them to your over axle pipes.
The mufflers and over axle pipes are one unit, each side. If you are going to use the included over axle pipes, you can only use 2008. GM changed the pipes slightly in 2009 and they won't PnP on your car. OR you can buy any year NPP, cut the mufflers off and weld them to your over axle pipes.
01-13-2018, 07:49 PM
#4
Race Director
Member Since: Mar 2011
Location: SW Florida
Posts: 13,256
Received 3,087 Likes
on
2,078 Posts
2021 C6 of the Year Finalist - Modified
For best results, post your parts wanted in the "C6 Parts for Sale and Wanted" in this forum:
https://www.corvetteforum.com/forums...le-wanted-115/
https://www.corvetteforum.com/forums...le-wanted-115/
01-13-2018, 08:06 PM
#5
Race Director
Member Since: Mar 2011
Location: SW Florida
Posts: 13,256
Received 3,087 Likes
on
2,078 Posts
2021 C6 of the Year Finalist - Modified
WoW ... You have been a member here since 2009 (8 1/2 years) ... and this is the very first post you have made.
WoW !
WoW !
01-14-2018, 08:17 AM
#7
Burning Brakes
For my '05, I found a set of Z06 muffler take offs locally for cheap and had the muffler welded on to the existing exhaust. Right at the muffler they neck down to the same size as the base. I liked it so much that I never did put the vacuum control in to close them.