Pretty Sure You Can Now Pull OBD2 Diagnostic Codes From OEM Nav Screen (pics)
#1
Melting Slicks
Thread Starter
Pretty Sure You Can Now Pull OBD2 Diagnostic Codes From OEM Nav Screen (pics)
I always knew about the hidden menu in the C6 Nav screen but didn't think you could pull up codes. Now granted I don't have any trouble codes in my 2013 GS and never did but I think they would show here if the car did. Maybe one of you guys with a present code can check to see if it shows. So here goes: Go to this part of the nav screen and hold your finger down on the screen right next to the yellow menu button until the Enter Pin screen appears. Enter the pin 295660. That will put the Nav in diagnostic mode and you can check a variety of different settings. One of the settings is diagnostic memory and that is where I think the codes would show up. Somebody give it a try and report back.
The following 2 users liked this post by Oh Boy:
Landru (03-18-2018),
Patsgarage (03-17-2018)
#4
Le Mans Master
Member Since: Oct 2005
Location: Left Coast, San Diego
Posts: 6,654
Received 2,093 Likes
on
1,207 Posts
You could pull a plug wire and see.....
#6
Melting Slicks
Thread Starter
Could very well be true. However I was thinking with bluetooth, onstar and the oem all having interaction with each other and onstar being able to diagnose trouble codes remotely I thought there might be a chance.
#8
Melting Slicks
Thread Starter
There were multiple threads years ago of members trying to hack the oem nav to play dvd movies. In other GM cars from 10 years ago especially the Cadillac you could enter a pin number like here and you could change the settings to play dvd movies. What I showed on the oem nav is the farthest people have gotten with the C6.
#11
Le Mans Master
Member Since: Oct 2005
Location: Left Coast, San Diego
Posts: 6,654
Received 2,093 Likes
on
1,207 Posts
#13
Team Owner
Member Since: Dec 2012
Location: Outside the Quick Stop N.J.
Posts: 30,426
Received 1,596 Likes
on
1,074 Posts
Pretty neat.
#14
Not me.
I have enough problems at this point I don't want to create one, even though I've known about the service only mode for more than a decade. I never knew any of this might show up on the dash/infotainment screen, if it even does for an '05?
I have enough problems at this point I don't want to create one, even though I've known about the service only mode for more than a decade. I never knew any of this might show up on the dash/infotainment screen, if it even does for an '05?
#17
Melting Slicks
Thread Starter
#18
Melting Slicks
It will diagnose audio or video errors [note the A or V tabs on the diagnostic screen] pertaining to the head unit. It will not detect or display OBDII codes.
The following users liked this post:
Welker1 (03-19-2018)
#20
Team Owner
Good to have the code for the NAV diagnostics - thank you!
Thanks,Matt
Thanks,Matt