Stock C6 exhaust removal, how high must you lift it??
#1
Race Director
Thread Starter
Member Since: Jul 2007
Location: Arlington Hts, IL
Posts: 15,878
Received 1,090 Likes
on
797 Posts
St. Jude Donor '13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
Stock C6 exhaust removal, how high must you lift it??
Coming from a C5 I know it had to be be 4' in the air which eliminated most DIY from attempting.
How high does the C6 need to be??
How high does the C6 need to be??
#3
Race Director
I did the axle back exhaust on a set of Rhino Ramps. Can't tell you about anything forward of that
The following users liked this post:
Jeff T. (05-18-2018)
#4
Burning Brakes
I don't know the actual height, but I was able to do it with jackstands. I put ramps underneath for additional protection.
I remember doing this on a C5 too and it had to be very high. I think the C6 was a little easier. A few pictures may help:
I remember doing this on a C5 too and it had to be very high. I think the C6 was a little easier. A few pictures may help:
Last edited by stingray71; 05-18-2018 at 02:22 PM.
The following users liked this post:
Jeff T. (05-18-2018)