C6 Full Bi LED Morimoto C7 Style Replacement Headlights from Umnitza WITH photos and
#361
------- UPDATES --------
PRODUCT -
This ocean shipment is done for headlights.
There are 2 or 3 spots available for tails, but the headlights have been filled.
SALE PRICING - NEXT ORDERS -
The price we have set right now, you can still order until the factory gives us the "OFF" switch - not sure if or when that will happen.
If you are still interested and want to get into the next shipment, I suggest you order as soon as you are comfortable. The next build begins next week once all of our goods are shipped.
We started the pre-order in mid June and by mid August 90% of our folks will receive the parts - the first 10% got theirs already shipped to them with the air shipment we brought in to give the first early adopters an added bonus for being confident in our product and company
Consider that your order now will probably get you headlights in the mid September time frame.
ADMINISTRATIVE -
Please be patient, we have been receiving on average between 10-30 PMs every day since we started this. We will answer you as quickly as we can.
*if you are interested in clear lens headlights - we will have a definitive answer for you in the next 2-3 days.
More updates as they are available.
PRODUCT -
This ocean shipment is done for headlights.
There are 2 or 3 spots available for tails, but the headlights have been filled.
SALE PRICING - NEXT ORDERS -
The price we have set right now, you can still order until the factory gives us the "OFF" switch - not sure if or when that will happen.
If you are still interested and want to get into the next shipment, I suggest you order as soon as you are comfortable. The next build begins next week once all of our goods are shipped.
We started the pre-order in mid June and by mid August 90% of our folks will receive the parts - the first 10% got theirs already shipped to them with the air shipment we brought in to give the first early adopters an added bonus for being confident in our product and company
Consider that your order now will probably get you headlights in the mid September time frame.
ADMINISTRATIVE -
Please be patient, we have been receiving on average between 10-30 PMs every day since we started this. We will answer you as quickly as we can.
*if you are interested in clear lens headlights - we will have a definitive answer for you in the next 2-3 days.
More updates as they are available.
#364
Apologize if this has already been covered and I missed it. For those of us that are getting lights on this order, what is the rough ballpark range of time frames to be getting the lights?
The following users liked this post:
MikeOC (07-27-2018)
#368
DO NOT TOUCH THE GOLD SCREWS ON THE BACK!!!
They convert your LEDs into deadly ACTIVE LASER beams ala transformers!! DON'T DO IT!!
Ok...late night humor for me and LED envy a bit.. :-)
good night and I hope you get the real answer...
They convert your LEDs into deadly ACTIVE LASER beams ala transformers!! DON'T DO IT!!
Ok...late night humor for me and LED envy a bit.. :-)
good night and I hope you get the real answer...
The following users liked this post:
Larry Myers (07-29-2018)
#372
Using heat to melt seal to separate lens, to do what nots and reheat to re-lens will induce a lot of undue heat stress on components longevity within.
Once done during factory assembly is enough for me to tolerate.
If I only keep the car for very short term, thats a non issue,
Unfortunately, I tend to keep toys long term, and have no desire to get punish when those heat induce problem crops up eventually down the line.
Once done during factory assembly is enough for me to tolerate.
If I only keep the car for very short term, thats a non issue,
Unfortunately, I tend to keep toys long term, and have no desire to get punish when those heat induce problem crops up eventually down the line.
#374
Racer
Originally Posted by info@umnitza.com
Thanks for all the orders guys
We'll be offering a solution for those of you that want something more later this week, stay tuned.
We'll be offering a solution for those of you that want something more later this week, stay tuned.
#375
Burning Brakes
#376
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,652
Received 328 Likes
on
262 Posts
Using heat to melt seal to separate lens, to do what nots and reheat to re-lens will induce a lot of undue heat stress on components longevity within.
Once done during factory assembly is enough for me to tolerate.
If I only keep the car for very short term, thats a non issue,
Unfortunately, I tend to keep toys long term, and have no desire to get punish when those heat induce problem crops up eventually down the line.
Once done during factory assembly is enough for me to tolerate.
If I only keep the car for very short term, thats a non issue,
Unfortunately, I tend to keep toys long term, and have no desire to get punish when those heat induce problem crops up eventually down the line.
The unsealing of the original headlights is what introduced our company to this market back in 2011 as many c6 lenses were cracking and fading. While we acknowledge your concern in practical experience over 10000s of headlights there is nothing to be concerned about whatsoever.
The following users liked this post:
Larry Myers (07-30-2018)
#377
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,652
Received 328 Likes
on
262 Posts
We received quite a few inquiries and realized we'd run out of available units. Next batch is already being built, so keep the orders coming at the current price we have listed.
Additionally, we will finalize the finished product for larry in the next couple of days, you will be surprised/shocked/amazed!
Additionally, we will finalize the finished product for larry in the next couple of days, you will be surprised/shocked/amazed!
#378
Drifting
I got around to adjusting mine over the weekend and what a difference.
They required significant adjustment both vertically and horizontally. But it literally takes minutes as the adjustment screws are directly behind the access flaps in the fender wells.
I'd suggest anyone installing these take the few minutes to adjust. Mine were so high I had to have been blinding everyone around.
After a week or teo of using these lights I'm incredibly satisfied. I've done a lot to my car and this is hands down one of my favorite mods. Aside from how they look they are significantly brighter than the oem HIDs. So much so I wish I had done a comparison pic.
Thanks again Umnitza for the badass lights and fantastic customer support!
They required significant adjustment both vertically and horizontally. But it literally takes minutes as the adjustment screws are directly behind the access flaps in the fender wells.
I'd suggest anyone installing these take the few minutes to adjust. Mine were so high I had to have been blinding everyone around.
After a week or teo of using these lights I'm incredibly satisfied. I've done a lot to my car and this is hands down one of my favorite mods. Aside from how they look they are significantly brighter than the oem HIDs. So much so I wish I had done a comparison pic.
Thanks again Umnitza for the badass lights and fantastic customer support!
The following users liked this post:
info@umnitza.com (08-01-2018)
#379
I got around to adjusting mine over the weekend and what a difference.
They required significant adjustment both vertically and horizontally. But it literally takes minutes as the adjustment screws are directly behind the access flaps in the fender wells.
I'd suggest anyone installing these take the few minutes to adjust. Mine were so high I had to have been blinding everyone around.
After a week or teo of using these lights I'm incredibly satisfied. I've done a lot to my car and this is hands down one of my favorite mods. Aside from how they look they are significantly brighter than the oem HIDs. So much so I wish I had done a comparison pic.
Thanks again Umnitza for the badass lights and fantastic customer support!
They required significant adjustment both vertically and horizontally. But it literally takes minutes as the adjustment screws are directly behind the access flaps in the fender wells.
I'd suggest anyone installing these take the few minutes to adjust. Mine were so high I had to have been blinding everyone around.
After a week or teo of using these lights I'm incredibly satisfied. I've done a lot to my car and this is hands down one of my favorite mods. Aside from how they look they are significantly brighter than the oem HIDs. So much so I wish I had done a comparison pic.
Thanks again Umnitza for the badass lights and fantastic customer support!