Morimoto C7-Style XB-2 LED Headlights
#81
Instructor
#83
Supporting Vendor
Thread Starter
All PM's replied!
__________________
Cole Manzelli
Cole@Vette-Lights.com
(405) 209-5328
Vette-Lights.com
"FORUM10" - 10% Off Almost All Upgrades
___________
C5 Collection
C6 Collection
C7 Collection
Cole Manzelli
Cole@Vette-Lights.com
(405) 209-5328
Vette-Lights.com
"FORUM10" - 10% Off Almost All Upgrades
___________
C5 Collection
C6 Collection
C7 Collection
#84
Instructor
Originally Posted by Caveman74
This position the White LED are on.
With the position of Auto. . You click down and All lights are off
With Amber on. I pull up the Emergency Brake they go off.
#85
Supporting Vendor
Thread Starter
Just a heads up, orders must be in by June 28th to make the first air shipment over from Taiwan. There is no "limited number of spots" - if you have an order in by then, you WILL have a set of lights.
This first batch is coming via air opposed to some others which are bringing it over via sea (adds a few weeks to lead time).
Our pricing is not publicly posted due to it being lower than a contractually agreed minimum advertised price. This is not to put a burden on you or cause any confusion - this is because we want to give you the best price possible and cannot list it publicly without breaching a contract.
Morimoto designed these lights and initiated production with the manufacturing factory. All others are generic and may be built to lesser specs due to Morimoto's stringent quality control checks not applying to these.
This first batch is coming via air opposed to some others which are bringing it over via sea (adds a few weeks to lead time).
Our pricing is not publicly posted due to it being lower than a contractually agreed minimum advertised price. This is not to put a burden on you or cause any confusion - this is because we want to give you the best price possible and cannot list it publicly without breaching a contract.
Morimoto designed these lights and initiated production with the manufacturing factory. All others are generic and may be built to lesser specs due to Morimoto's stringent quality control checks not applying to these.
The following users liked this post:
corvette312 (06-25-2018)
#86
Instructor
#88
Instructor
Originally Posted by Caveman74
The White LED stays on with the Amber turn signal.
#89
Supporting Vendor
Thread Starter
All PM's Replied!
Getting closer and closer to arrival!!
Getting closer and closer to arrival!!
#90
Supporting Vendor
Thread Starter
You will not find these Morimoto headlights listed below $1280 anywhere - this is by contract. But preorder pricing is indeed better priced than this - please PM to inquire. The deadline on preorders is June 28th! Coming up quickly!!
If you find a knock off listed cheaper, please PM over proof of price and I'd imagine we can get you converted to the name brand set at the same cost.
Remember these orders all ship FREE within the US!
If you find a knock off listed cheaper, please PM over proof of price and I'd imagine we can get you converted to the name brand set at the same cost.
Remember these orders all ship FREE within the US!
#93
Heel & Toe
I would imagine any kind of body or collision shop would be capable of installing these if you didn't want to do it yourself.
Last edited by AtomicCorvette; 06-24-2018 at 07:21 AM.
#94
Supporting Vendor
Thread Starter
All PM's replied (other than one pending a call on Monday)!
#96
Supporting Vendor
Thread Starter
Originally Posted by Matthewstorm
The sets offered here are Morimoto branded and have been put through stringent quality control checks (I'm not sure that the unbranded ones are or are not). These are stocked at a US distributor in the event that any warranty work is needed later (hopefully this never happens). The first Morimoto shipment is coming over via air which puts the eta at early-mid July whereas the other brand is coming by sea last I saw which will likely lead to an August arrival.
Discounted preorder prices are very competitive to theirs even though there is so much added value here.
The following users liked this post:
corvette312 (06-25-2018)
#97
Drifting
It will be interesting to see if this is the case with the final production "programming" ... technically, if they are "DOT approved" the white DRL will have to go out when the turn signals are on given their proximity (I believe the rule is if they are within 3 inches of each other, the DRL has to be extinguished when the turn signal is on ... hence the rather odd behavior of most current Dodge products). Its not a deal breaker for me, but I would prefer the DRL goes off. Looking forward to receiving my set and playing with them.
#99
Drifting
They are buying factory direct from Taiwan (sounds like a warranty headache down the road if ever needed) and are buying an unbranded set then slapping a name on it.
The sets offered here are Morimoto branded and have been put through stringent quality control checks (I'm not sure that the unbranded ones are or are not). These are stocked at a US distributor in the event that any warranty work is needed later (hopefully this never happens).
The sets offered here are Morimoto branded and have been put through stringent quality control checks (I'm not sure that the unbranded ones are or are not). These are stocked at a US distributor in the event that any warranty work is needed later (hopefully this never happens).
It seems like that has to be the case. It's hard to imagine Morimoto releasing a design and it being copied exactly before they are even released.
I just want to understand what everyone is getting into here.
#100
Instructor
Curious to see how they got the DRL to work or half *** cutoff with the Amber turn . There are only 5 wires on the harness , I bet they either reversed or connected something.