New stereo with front and rear cameras installed
#41
I'm assembling all the parts to do pretty much the same thing with my new Pioneer HU. Thanks for all the helpful info and photos.
The one thing that puzzles me is:
While the rear camera is only turned on when in reverse does that mean the front camera is on continually while the ignition is on?
It appears to be that way in the Pyle instructions so it must be OK but I still wonder.
Any thoughts?
The one thing that puzzles me is:
While the rear camera is only turned on when in reverse does that mean the front camera is on continually while the ignition is on?
It appears to be that way in the Pyle instructions so it must be OK but I still wonder.
Any thoughts?
#42
Le Mans Master
Member Since: Jan 2017
Location: Morris County New Jersey
Posts: 5,371
Received 1,636 Likes
on
1,121 Posts
I'm assembling all the parts to do pretty much the same thing with my new Pioneer HU. Thanks for all the helpful info and photos.
The one thing that puzzles me is:
While the rear camera is only turned on when in reverse does that mean the front camera is on continually while the ignition is on?
It appears to be that way in the Pyle instructions so it must be OK but I still wonder.
Any thoughts?
The one thing that puzzles me is:
While the rear camera is only turned on when in reverse does that mean the front camera is on continually while the ignition is on?
It appears to be that way in the Pyle instructions so it must be OK but I still wonder.
Any thoughts?
#43
Race Director
Thread Starter
Member Since: May 2006
Location: SOFLA
Posts: 12,973
Received 1,013 Likes
on
599 Posts
2016 Corvette of Year
2015 C6 of Year Finalist
I'm assembling all the parts to do pretty much the same thing with my new Pioneer HU. Thanks for all the helpful info and photos.
The one thing that puzzles me is:
While the rear camera is only turned on when in reverse does that mean the front camera is on continually while the ignition is on?
It appears to be that way in the Pyle instructions so it must be OK but I still wonder.
Any thoughts?
The one thing that puzzles me is:
While the rear camera is only turned on when in reverse does that mean the front camera is on continually while the ignition is on?
It appears to be that way in the Pyle instructions so it must be OK but I still wonder.
Any thoughts?
Outlet in the center console stays on
#44
Pro
I used body molding mounting tape to put it under the lip to the left of the rear keyhole. I will look at the model # of the Cameras when I get home and post up. My wife purchased them for me, will ask where she ordered from.
Same for the front the auto body molding mounting tape, in the center under the lip of the opening in front of the egg crate grill. It has a bracket that you can screw to the body, I chose the tape route, I have used it in the past and it sticks great. Just need to make sure you clean really well with alcohol. I fished the wire through the grill, I put it inside the high temp split loom in pic below, it protects the wires.
Same for the front the auto body molding mounting tape, in the center under the lip of the opening in front of the egg crate grill. It has a bracket that you can screw to the body, I chose the tape route, I have used it in the past and it sticks great. Just need to make sure you clean really well with alcohol. I fished the wire through the grill, I put it inside the high temp split loom in pic below, it protects the wires.
#46
Team Owner
Great job on the install..very neat and professional looking.
The following users liked this post:
mcandrew67 (02-02-2019)