Installed Cleartastic film
#1
Burning Brakes
Thread Starter
Installed Cleartastic film
Spent all afternoon on it today. Kits 76 and 80, which cover the front and lower part of the front bumper, the gills, lower fenders, rear brake ducts, and rear section of the rocker panels. Not an extremely difficult job. Just time consuming. Back when I had my Z06, I had a guy put VentureShield on much more than what I did today and I don't think I paid more than $900 for that. That was money well spent. This was tiring, but satisfying. Nothing really to see in the pics. That's kind of the point.
The following 2 users liked this post by Solaris:
Cleartastic (07-09-2019),
jimijam (07-06-2019)
#2
Burning Brakes
Nice Job, I have thought about doing this also. I might start with the mirrors and work my way to larger areas.
The following users liked this post:
Solaris (07-09-2019)
#3
Burning Brakes
Thread Starter
Thanks. IMO, the best place to start is on panels with little to no curve to get familiar with the application process. I saved the bumper for last and I'm glad I did. The other parts were relatively quick. The lower fender and rockers were a piece of cake.
#4
Team Owner
Member Since: Mar 2004
Location: Oklahoma City OK
Posts: 58,259
Received 1,675 Likes
on
1,298 Posts
C6 of Year Finalist (appearance mods) 2019
Good job
Last edited by jrose7004; 07-07-2019 at 12:41 PM.
The following users liked this post:
Solaris (07-09-2019)
#5
Premium Supporting Vendor
Spent all afternoon on it today. Kits 76 and 80, which cover the front and lower part of the front bumper, the gills, lower fenders, rear brake ducts, and rear section of the rocker panels. Not an extremely difficult job. Just time consuming. Back when I had my Z06, I had a guy put VentureShield on much more than what I did today and I don't think I paid more than $900 for that. That was money well spent. This was tiring, but satisfying. Nothing really to see in the pics. That's kind of the point.
Great job! Glad we could help protect that beautiful GS! Thank you for your business and for posting your results!
Ed
The following 2 users liked this post by Cleartastic:
Solaris (07-09-2019),
TKO Performance (07-09-2019)
#6
Burning Brakes
Thread Starter
The following 2 users liked this post by Solaris:
Cleartastic (07-09-2019),
TKO Performance (07-09-2019)
#8
Burning Brakes
Thread Starter
The following 2 users liked this post by Solaris:
Cleartastic (07-09-2019),
TKO Performance (07-09-2019)
#9
Premium Supporting Vendor
Ed
The following users liked this post:
Solaris (07-09-2019)
The following users liked this post:
Solaris (07-09-2019)
#11
Burning Brakes
Thread Starter
Thanks. I don't know what had been applied to the paint before I bought it in May, but the water was beading up nicely while washing it. I then applied 303 Touchless Sealant. Since I had to de-wax/seal the paint for the Cleartastic, I applied Jescar Powerlock by hand over those areas after 2 days of letting it adhere.
The following users liked this post:
Solaris (07-09-2019)
#13
How does the kit address the flags on the top bumper ? Most shops will remove the emblem , apply the material and then reinstall the flag emblem.
#14
Burning Brakes
Thread Starter