Doing my headlight lenses
#1
Le Mans Master
Thread Starter
Doing my headlight lenses
Suck,suck,suck,suck..... motherf$@#*&...........................
OK now that I got that out of my system, I broke some pieces off taking apart my first headlight. Am I alone in this? Somehow I don't think so. The black seal areound the lens came out fairly easy. Once I got it started with a small screwdriver it pulled out in a couple of long pieces.
Wil crazy glue work on these pieces?
OK now that I got that out of my system, I broke some pieces off taking apart my first headlight. Am I alone in this? Somehow I don't think so. The black seal areound the lens came out fairly easy. Once I got it started with a small screwdriver it pulled out in a couple of long pieces.
Wil crazy glue work on these pieces?
Last edited by ls1121; 07-11-2019 at 06:04 PM.
The following users liked this post:
chrisharek (07-12-2019)
#4
Melting Slicks
Member Since: Feb 2017
Location: Phoenix Arizona
Posts: 3,031
Received 1,119 Likes
on
764 Posts
C6 of Year Finalist (appearance mods) 2019
https://aescorvetteparts.com/collections/corvette-c6
Also check these guys out, I have bought stuff off of them, they are a vendor here on the forum.
Also check these guys out, I have bought stuff off of them, they are a vendor here on the forum.
#5
Supporting Vendor
Suck,suck,suck,suck..... motherf$@#*&...........................
OK now that I got that out of my system, I broke some pieces off taking apart my first headlight. Am I alone in this? Somehow I don't think so. The black seal areound the lens came out fairly easy. Once I got it started with a small screwdriver it pulled out in a couple of long pieces.
Wil crazy glue work on these pieces?
OK now that I got that out of my system, I broke some pieces off taking apart my first headlight. Am I alone in this? Somehow I don't think so. The black seal areound the lens came out fairly easy. Once I got it started with a small screwdriver it pulled out in a couple of long pieces.
Wil crazy glue work on these pieces?
#6
Le Mans Master
Get some of the 2 part epoxy made for plastic, this stuff is great , it has a liquid for one side and a felt tip pen with hardener for the other side... Once you put the 2 halfs together they're not coming apart, and if it breaks again it won't be in the same spot., Trust Me on this..WW
Last edited by WW7; 07-11-2019 at 07:19 PM.
#8
Advanced
Agree with the 2 part epoxy, I had the same problem, I would rather change the transmission then do the headlights again. BUT it’s worth it when it’s done..
#9
Safety Car
Yea, I got my kit and need to do it. How long should I allow for it? It is my only vehicle, so i will need to start and finish it with no hiccups.
#10
Le Mans Master
Thread Starter
So what glue did you use to attach the lens? In a video that I had watched the adhesive was a beige color, is there any black adhesive?
#11
Supporting Vendor