60th anniversary editions
#1
Instructor
Thread Starter
60th anniversary editions
Can anyone tell me how many 60th anniversary GS Coupes were produced. Unable to find out anywhere. There were also vert produced.
Thanks in Advance
FlyinT
Thanks in Advance
FlyinT
#3
Le Mans Master
Member Since: Jan 2016
Location: New Mexico
Posts: 8,055
Received 2,683 Likes
on
1,408 Posts
2018 C6 of Year Finalist
The following users liked this post:
flyint (09-16-2019)
#5
Race Director
Member Since: Mar 2011
Location: SW Florida
Posts: 13,256
Received 3,085 Likes
on
2,078 Posts
2021 C6 of the Year Finalist - Modified
You asked where you can buy a Borla exhaust system that's not too loud for your GS coupe ....
This is a closeout ad for the Borla "Touring" (type 1) cat-back exhaust which also includes the intermediate (X-Pipe) ... all 304 stainless
Says it fits the 2009-2011 C6 with the 2.5" pipes .... But I believe the 2009-2013 with 2.5" pipes all use the same system.
Because of the closeout, if purchased directly from Borla, this will cost you $937 with about $36 shipping to Florida
You will never find this exhaust at a cheaper price than this ... period
https://www.borla.com/products/corv_...t__140295.html
______________________________________
BTW ... Jegs is selling this same Borla 140295 exhaust system for $1,674
https://www.jegs.com/i/Borla/157/140295/10002/-1
.
This is a closeout ad for the Borla "Touring" (type 1) cat-back exhaust which also includes the intermediate (X-Pipe) ... all 304 stainless
Says it fits the 2009-2011 C6 with the 2.5" pipes .... But I believe the 2009-2013 with 2.5" pipes all use the same system.
Because of the closeout, if purchased directly from Borla, this will cost you $937 with about $36 shipping to Florida
You will never find this exhaust at a cheaper price than this ... period
https://www.borla.com/products/corv_...t__140295.html
______________________________________
BTW ... Jegs is selling this same Borla 140295 exhaust system for $1,674
https://www.jegs.com/i/Borla/157/140295/10002/-1
.
Last edited by Turbo6TA; 09-17-2019 at 06:34 AM.
#6
Race Director
Member Since: Mar 2011
Location: SW Florida
Posts: 13,256
Received 3,085 Likes
on
2,078 Posts
2021 C6 of the Year Finalist - Modified
BTW ... I see that the Borla exhaust system I mentioned above has the #29 tip style ... These are 4.25" wide Oval Angle-Cut tips.
This is a photo of my supercharged GS with the same older style Borla (type 1) exhaust.
I previously removed the NPP mufflers that were on the car after installing a set of headers (with cats) ... The NPP were great mufflers, but after installing the headers, the exhaust note was obnoxiously loud when the NPP valves would open. My fix was to replace the NPP system with these Borla mufflers.
Attachment 48332457
Attachment 48331114
This is a photo of my supercharged GS with the same older style Borla (type 1) exhaust.
I previously removed the NPP mufflers that were on the car after installing a set of headers (with cats) ... The NPP were great mufflers, but after installing the headers, the exhaust note was obnoxiously loud when the NPP valves would open. My fix was to replace the NPP system with these Borla mufflers.
Attachment 48332457
Attachment 48331114
Last edited by Turbo6TA; 09-17-2019 at 06:57 AM.
#7
Race Director
Member Since: Mar 2011
Location: SW Florida
Posts: 13,256
Received 3,085 Likes
on
2,078 Posts
2021 C6 of the Year Finalist - Modified
What is the reason you want to change the muffters on your 60th Anniversary GS ?