C6 Hood Alignment Bumpers
#1
Intermediate
Thread Starter
C6 Hood Alignment Bumpers
Hello C6 owners,
In the process of cleaning and polishing my front driver’s side fender, I knocked off the alignment bumper.
It happened once before and I reattached it with the help of some 3m double sided tape.
But now it has vanished into the abyss of my engine compartment.
Does anyone have an idea where to find them?
Thanks
In the process of cleaning and polishing my front driver’s side fender, I knocked off the alignment bumper.
It happened once before and I reattached it with the help of some 3m double sided tape.
But now it has vanished into the abyss of my engine compartment.
Does anyone have an idea where to find them?
Thanks
#2
Race Car Tech
A picture of what you need would be nice.
Last edited by 4SUMERZ; 10-21-2019 at 09:50 AM.
#4
Intermediate
Thread Starter
I found a photo of the bumpers I was referring to.
It’s the triangular prism rubber that is glued to the inside top of the fender where the hood meets it when closed.
Last edited by mongol7112000; 10-21-2019 at 11:35 AM. Reason: Found a photo
#5
Race Car Tech
They are called hood closing bumpers
Current GM part no: 15256911
The following users liked this post:
mongol7112000 (10-21-2019)
#8
Race Car Tech
If the dealer can't help you,
here is what I found on google, but expensive
https://www.smcautoparts.com/Pair-of...911-axx001.htm
here is what I found on google, but expensive
https://www.smcautoparts.com/Pair-of...911-axx001.htm
The following users liked this post:
mongol7112000 (10-21-2019)