MCruz

Hi any help I have a 09 base power seat quit working after days of trying to move the seat I finally was able took the seat out and I can't find any wires cut or broken any idea what else I should check I got power from the wires going into the car and then no power after that. Is not the fuse either. the lumbar part works but the back and forth doesn't. Thank you

LarryMow

When my seats quit working, it was the plug itself. I guess moving the seat back and forth caused to two halves of the plug to work itself looses just enough to become a nuisance. Plugged it back together, ran a zip tie through the wires pulling the plugs together tightly. Havent had a problem since

MCruz

I solved the problem it was a bad wire coming from fuse box , I was able to move the seat by hot wiring the side seat control using the lumbar control with a paper clip .