[Z06] C6 Front License Plate Bracket
#42
Race Director
Originally Posted by Mike Siska
vetdude...that is a nice looking frame around the lp. Where did you get it?
#44
Drifting
Member Since: Oct 2005
Location: Honolulu
Posts: 1,285
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by vetdude
From my post in C6 General:
Finally got to take some snaps last night after work (took the vette to work yesterday; was a relief not to having to worry about LEOs pulling me over for no front tag for a change - I work in an area where it's not uncommon to see 4-6 LEO cars during lunch hour). With the tag removed, you'd never know it was there!
Hey Ray, have you guys thought making the brackets for the Didge Viper crowd? A coworker who has a Viper saw my bracket yesterday and he said he ansd a lot of his club memebers would be very interested. Just a thought. Thanks again for a great product.
Finally got to take some snaps last night after work (took the vette to work yesterday; was a relief not to having to worry about LEOs pulling me over for no front tag for a change - I work in an area where it's not uncommon to see 4-6 LEO cars during lunch hour). With the tag removed, you'd never know it was there!
Hey Ray, have you guys thought making the brackets for the Didge Viper crowd? A coworker who has a Viper saw my bracket yesterday and he said he ansd a lot of his club memebers would be very interested. Just a thought. Thanks again for a great product.
#45
Racer
Member Since: Aug 2005
Location: WESTCHESTER NEW YORK
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '06-'07-'08
Vararam Z06 almost ready
Vararam is putting the finishing touches on their C6-Z06 Intake. Chuck Cow is involved with the first street car and putting the finishing touches on it as I type this.
Why post this here?
I saw the New Vararam Intake unit today FOR THE C6-Z06!
It will be mounted directly behind where the front plate is in these photo is.
If I buy one of these brackets it will be for the SOLE purpose of talking my way out of a ticket by offering to clip it on in front of the FUZZ.
I will have to tell them I took the plate off in order to wash it thoroughly.
As you saw in my previous post,
I have recieved two tickets totalling $240.00
In my opinion,
These cars should be excluded from the front plate laws.
Especially considering they are AMERICAN MADE MUSCLE!
Just my .02
Why post this here?
I saw the New Vararam Intake unit today FOR THE C6-Z06!
It will be mounted directly behind where the front plate is in these photo is.
If I buy one of these brackets it will be for the SOLE purpose of talking my way out of a ticket by offering to clip it on in front of the FUZZ.
I will have to tell them I took the plate off in order to wash it thoroughly.
As you saw in my previous post,
I have recieved two tickets totalling $240.00
In my opinion,
These cars should be excluded from the front plate laws.
Especially considering they are AMERICAN MADE MUSCLE!
Just my .02
#46
Le Mans Master
Member Since: Oct 2005
Location: Fallston Maryland
Posts: 6,635
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by vetdude
Thanks. Cheapo black metal frame from local parts store (Advance Auto), sanded, primered, sprayed with GM MSM Touchup Spray and clear coated. Cost of frame $7.50 + paint. I have one of the GM Body Colored frames for the rear tag and felt it was too big for the front IMHO. The less attention drawn to the front tag the better.
Looks classy
#47
Race Director
Originally Posted by Kingjerbo
Vararam is putting the finishing touches on their C6-Z06 Intake. Chuck Cow is involved with the first street car and putting the finishing touches on it as I type this.
Why post this here?
I saw the New Vararam Intake unit today FOR THE C6-Z06!
It will be mounted directly behind where the front plate is in these photo is.
If I buy one of these brackets it will be for the SOLE purpose of talking my way out of a ticket by offering to clip it on in front of the FUZZ.
I will have to tell them I took the plate off in order to wash it thoroughly.
As you saw in my previous post,
I have recieved two tickets totalling $240.00
In my opinion,
These cars should be excluded from the front plate laws.
Especially considering they are AMERICAN MADE MUSCLE!
Just my .02
Why post this here?
I saw the New Vararam Intake unit today FOR THE C6-Z06!
It will be mounted directly behind where the front plate is in these photo is.
If I buy one of these brackets it will be for the SOLE purpose of talking my way out of a ticket by offering to clip it on in front of the FUZZ.
I will have to tell them I took the plate off in order to wash it thoroughly.
As you saw in my previous post,
I have recieved two tickets totalling $240.00
In my opinion,
These cars should be excluded from the front plate laws.
Especially considering they are AMERICAN MADE MUSCLE!
Just my .02
#49
Melting Slicks
Member Since: May 2001
Location: Md
Posts: 2,292
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by vetdude
Thanks all for the compliments. Going to Carlisle Dan?
Saturday, I'm meeting up with Ranger at the same place at the same time.
#50
Le Mans Master
Member Since: Oct 2005
Location: Fallston Maryland
Posts: 6,635
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by vetdude
Thanks all for the compliments. Going to Carlisle Dan?
Saturday going to Summit point.
Hope to see you
#51
Race Director
Originally Posted by outnumbered
Yes.I will be there Friday.You can find me at the NCCC tent between 11-2:00.I volunteered to sell raffle tickets for the Kidney foundation.
Saturday going to Summit point.
Hope to see you
Saturday going to Summit point.
Hope to see you
70 -> 40W -> 15N -> Carlisle
Last edited by vetdude; 08-22-2006 at 08:30 AM.
#52
Le Mans Master
Member Since: Oct 2005
Location: Fallston Maryland
Posts: 6,635
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by vetdude
See you there my friend. Heading up 5AM Friday; staying over in Chambersburg for Saturday.
70 -> 40W -> 15N -> Carlisle
70 -> 40W -> 15N -> Carlisle
#53
Racer
Member Since: Aug 2005
Location: WESTCHESTER NEW YORK
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '06-'07-'08
Lol
Originally Posted by vetdude
You could always drill holes in the front plate for more air. Or, use the factory bracket to get the plate away from the intake and make the nose look like crap - can't have it all! I agree, front tag laws suck!
I wonder what MR. POLICE MAN WOULD SAY ABOUT THAT!
Techically it would still be there right?
They would probably charge us with altering state property and charge us with a Felony of Fraud...
#54
Race Director
Hey Ray,
Any chance you guys selling replacement parts for the removable brackets, e.g. wing nuts or the small rubber thread covers???? I can see me losing at least one of these bad boys in the future.
Any chance you guys selling replacement parts for the removable brackets, e.g. wing nuts or the small rubber thread covers???? I can see me losing at least one of these bad boys in the future.
#55
Originally Posted by vetdude
Hey Ray,
Any chance you guys selling replacement parts for the removable brackets, e.g. wing nuts or the small rubber thread covers???? I can see me losing at least one of these bad boys in the future.
Any chance you guys selling replacement parts for the removable brackets, e.g. wing nuts or the small rubber thread covers???? I can see me losing at least one of these bad boys in the future.
#56
Melting Slicks
Originally Posted by vetdude
Hey Ray,
Any chance you guys selling replacement parts for the removable brackets, e.g. wing nuts or the small rubber thread covers???? I can see me losing at least one of these bad boys in the future.
Any chance you guys selling replacement parts for the removable brackets, e.g. wing nuts or the small rubber thread covers???? I can see me losing at least one of these bad boys in the future.
#57
Le Mans Master
Thread Starter
Originally Posted by vetdude
Hey Ray,
Any chance you guys selling replacement parts for the removable brackets, e.g. wing nuts or the small rubber thread covers???? I can see me losing at least one of these bad boys in the future.
Any chance you guys selling replacement parts for the removable brackets, e.g. wing nuts or the small rubber thread covers???? I can see me losing at least one of these bad boys in the future.
Thanks for asking
Peter C.
#58
Team Owner
I attempted installing your Z06 bracket last weekend, but noticed that the white alignment line seemed to be off to one side by almost one half an inch when measured. Is that intentional or a quality control issue.
#59
Le Mans Master
Thread Starter
No, that is not right. I wish you notified us sooner, we would have sent a new one over night.
PM sent.
PM sent.
Last edited by Top Flight Reproductions; 08-25-2006 at 07:58 AM.
#60
Drifting
Member Since: Dec 2003
Location: Buchanan Dam Texas
Posts: 1,966
Likes: 0
Received 3 Likes
on
2 Posts
St. Jude Donor '04-'05-'06-'07-'11-'12-'13
Peter...Help!
Peter I am mounting my bracket now and was wondering if the 2 blue spacers are supposed to stay on the bottom holes of the back of the bracket? The screws do not penetrate into them with the colored frame.
Mike
Mike