[Z06] Bleed screw at the clutch slave cylinder?
#1
Drifting
Thread Starter
Bleed screw at the clutch slave cylinder?
Does anyone know if there is a bleed screw under the car at the clutch slave cylinder to drain and change ALL the fluid. Changing the reservior fluid seem like only a 1/2 measure at best.I have done it many times but it never stays clean !
#2
Melting Slicks
Originally Posted by cbgpe
Does anyone know if there is a bleed screw under the car at the clutch slave cylinder to drain and change ALL the fluid. Changing the reservior fluid seem like only a 1/2 measure at best.I have done it many times but it never stays clean !
I put a remote bleeder on my C5 and if I ever have the clutch out of my Z06 I will do the same..
#3
Melting Slicks
Member Since: Sep 2006
Location: San Mateo CA
Posts: 2,173
Likes: 0
Received 0 Likes
on
0 Posts
I plan to replace the tunnel plate on my z06 the next weekend I'm free. Is it worthwhile to install an extension then, or is it much more involved than just the tunnel plate?