02-23-2015, 04:12 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Tires and Wheels
- How to Customize Your Rims
Step by step instructions for do-it-yourselfers.
Browse all: Tires and Wheels
[Z06] Post pics of your C6 Z06's with custom wheels!
04-03-2007, 12:53 AM
#21
Racer
Some of our customer's cars.
In addition, we have done Forgeline, and of course, many stock C6Z06 center caps.
HRE/427
House of Wheels chrome/427
C6Z06 stock silver wheels/427
Please check out all of our C6Z06 427 center caps here:
427 Center Caps
Roger@CCC
Custom Center Caps
Supporting Vendor
In addition, we have done Forgeline, and of course, many stock C6Z06 center caps.
HRE/427
House of Wheels chrome/427
C6Z06 stock silver wheels/427
Please check out all of our C6Z06 427 center caps here:
427 Center Caps
Roger@CCC
Custom Center Caps
Supporting Vendor
Last edited by Roger@CCC; 02-14-2010 at 02:45 PM.
04-03-2007, 05:52 PM
#26
Pro
Member Since: Sep 2005
Location: Hilmar CA
Posts: 662
Likes: 0
Received 2 Likes
on
2 Posts
St. Jude Donor '07
This would be a great topic to have a application table in.
Somthing with all avalible info.
Brand, size, offset, including tire size and car highth and rub factor.
could be a good FAQ
Somthing with all avalible info.
Brand, size, offset, including tire size and car highth and rub factor.
could be a good FAQ
04-03-2007, 06:43 PM
#28
Racer
Member Since: Apr 2006
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
...and drivability
...and how about "real" drivability. As awesome as some of these cars look, and they do look sweet (i.e. SW 
), I need to "drive" my beast without worring about rubbing or scraping all the time. CA roads would not allow my car to be any lower then it already is (lowered bolts to 1/2 turn from bottoming out).
), I need to "drive" my beast without worring about rubbing or scraping all the time. CA roads would not allow my car to be any lower then it already is (lowered bolts to 1/2 turn from bottoming out).
04-03-2007, 06:46 PM
#29
Drifting
Member Since: Feb 2000
Location: Lake Travis TX
Posts: 1,513
Likes: 0
Received 0 Likes
on
0 Posts
if anyone is looking to sell your stock wheels/tires or even your aftermarket wheels/tires... let me know
i am ready to buy!!
kwebber@gmail.com
SW, if you wanna sell yours, call me- you know i am local
i am ready to buy!!
kwebber@gmail.com
SW, if you wanna sell yours, call me- you know i am local
Last edited by KDubb; 04-03-2007 at 06:49 PM.
04-04-2007, 02:27 PM
#31
Le Mans Master
Member Since: Dec 1999
Location: Houston Texas
Posts: 8,627
Likes: 0
Received 1 Like
on
1 Post
CI 1-2-3-4-5-6-7-8-9-10 Vet
St. Jude Donor '03-'04-'05-'06-'07-'08-'09
SW I see you got your Mach1 project done. SWEET!
I got a couple of PM's so will just add this here...
HRE 842's, 19's and 20's, satin finish cleared on the spokes, high polish and no clear on the rims. 325/25ZR/20's on the back, 275/30ZR/19's on the fronts. I could have put 345's on the back but would have been different size sidewall and I liked the look the way it turned out. SW steered me right on the combination.
I have owned all high polish HRE's in the past and my oh my were they hard to keep clean!
Doug
I got a couple of PM's so will just add this here...
HRE 842's, 19's and 20's, satin finish cleared on the spokes, high polish and no clear on the rims. 325/25ZR/20's on the back, 275/30ZR/19's on the fronts. I could have put 345's on the back but would have been different size sidewall and I liked the look the way it turned out. SW steered me right on the combination.
I have owned all high polish HRE's in the past and my oh my were they hard to keep clean!
Doug
Last edited by Snowman; 04-04-2007 at 02:30 PM.
04-04-2007, 03:34 PM
#32
Pro
Member Since: Feb 2006
Location: Gothenburg
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
My Forgeline wheels goes on April 17....will post pictures after that.
04-08-2007, 06:52 AM
#33
Burning Brakes
Thread Starter
Member Since: Mar 2007
Location: Dallas TX
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
The following users liked this post:
Cone killer (11-06-2023)
