[ZR1] Tint the hood window? Photshop anyone?
#1
Safety Car
Thread Starter
Tint the hood window? Photshop anyone?
Looking more at the Detroit NAIAS ZR1, I'm thinking just tinting that hood window might give it a nice look. Especially with that dark body color, deep tinted side windows and CF roof.
Being clear, to me it just stands out too much. Deep tint the hood window so you can just barely see what's beneath it. I think it would flow better with the whole theme of the exterior appearance. The bright silver and blue under the window wouldn't jump out so much.
If it works, what an easy fix that would be.
Can someone photoshop that Detroit show car with deep tinted windows and deep tint the hood window so you can just barely see the engine.
Being clear, to me it just stands out too much. Deep tint the hood window so you can just barely see what's beneath it. I think it would flow better with the whole theme of the exterior appearance. The bright silver and blue under the window wouldn't jump out so much.
If it works, what an easy fix that would be.
Can someone photoshop that Detroit show car with deep tinted windows and deep tint the hood window so you can just barely see the engine.
#2
Safety Car
You could add blue neon under the window so there'd be no mistaking the Blue Devil at night...
#8
That's right. It's bad enough that shorter people will be leaning way over and scratching the wide front fenders to get a better view into that itty -bitty window , but with a tint, they'll now be on hands and knees on the hood trying even harder to peer in !
#9
Melting Slicks
Member Since: Aug 2006
Location: Rochester NY
Posts: 2,030
Likes: 0
Received 0 Likes
on
0 Posts
So right!
#10
I do see it being a factor that will make it next to impossible to keep handprints off the car.
#11
Tint won't hold up, you'll have to paint the exterior surface of the window.
Better idea; scrap the engine cover, polish the intake, and show-off that engine through the window.
Better idea; scrap the engine cover, polish the intake, and show-off that engine through the window.
#12
Advanced
Member Since: Aug 2004
Location: Desert Sands of Kuwait
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Jose
#13
Safety Car
Time for one of the vendors to mold a CF hood that will clear the intake without a window...
They'll sell a lot to the ZR1 crowd, and they'll fit on the Z06's as well.
They'll sell a lot to the ZR1 crowd, and they'll fit on the Z06's as well.
#14
Not possible to put film on it because it is not actual glass. Plastics emit gasses and vapors over their lifetime and it causes the films to bubble and then you will not be able to get the film off because you can't scrape it without ruining the window. You would then have to replace the hood window get back to original look.