[ZR1] Heavy Duty Non-Slip C5 C6 Z06 GS ZR1 Jacking Pucks-FREE SHIPPING!
#1
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Heavy Duty Non-Slip C5 C6 Z06 GS ZR1 Jacking Pucks-FREE SHIPPING!
Heavy Duty Non-Slip C5 C6 Jacking Pucks
C5, C6, ZR1, Z06, & Grandsport
2 Pack-$24.99 FREE SHIPPING!
4 pack-$34.99 FREE SHIPPING!
-Works on ALL 1997-2013 Corvettes
-Works w/ C6 Z06, Grand Sport & ZR1 also.
-Made in the USA & Lifetime Warranty!
-Fits extremely snugly!
-7 Day Money Back Guarantee!
If your interested in a set please let me know and we'll get a set sent out to you ASAP
Just click here to place your order
http://www.tpsmotorsports.com/catalo...=pucks&x=0&y=0
EVERY CORVETTE OWNER SHOULD HAVE A SET OF THESE PUCKS IN THEIR TRUNK. The Jacking Pads are perfect for the home mechanic or any Corvette service center. This is the cheapest insurance you can buy for your car. The Jacking Pad will prevent any possible body damage related to lifting the C5/C6. Whether your using a floor jack or a hoist, this is the protection your car deserves.
Lifetime Warranty
We are so confident that you'll like these Jacking Pucks for your C5 or C6 Corvette we're offering a 7 day money back and a lifetime warranty if it fails for ANY REASON. Just give us a call, send back the old puck, and we'll send you a brand new one.. no questions asked.
Click here to check out the video of how they work!
C5, C6, ZR1, Z06, & Grandsport
2 Pack-$24.99 FREE SHIPPING!
4 pack-$34.99 FREE SHIPPING!
-Works on ALL 1997-2013 Corvettes
-Works w/ C6 Z06, Grand Sport & ZR1 also.
-Made in the USA & Lifetime Warranty!
-Fits extremely snugly!
-7 Day Money Back Guarantee!
If your interested in a set please let me know and we'll get a set sent out to you ASAP
Just click here to place your order
http://www.tpsmotorsports.com/catalo...=pucks&x=0&y=0
EVERY CORVETTE OWNER SHOULD HAVE A SET OF THESE PUCKS IN THEIR TRUNK. The Jacking Pads are perfect for the home mechanic or any Corvette service center. This is the cheapest insurance you can buy for your car. The Jacking Pad will prevent any possible body damage related to lifting the C5/C6. Whether your using a floor jack or a hoist, this is the protection your car deserves.
Lifetime Warranty
We are so confident that you'll like these Jacking Pucks for your C5 or C6 Corvette we're offering a 7 day money back and a lifetime warranty if it fails for ANY REASON. Just give us a call, send back the old puck, and we'll send you a brand new one.. no questions asked.
Click here to check out the video of how they work!
__________________
TPSMotorsports.com
Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
Authorized dealer of Corbeau Seats, ECS Superchargers, Edelbrock SuperChargers, A&A Superchargers, Kooks, Whipple, Magnalow, Corsa, Borla. LG Motorsports, Procharger, Billy Boat Exhaust, AWE Exhaust, American Racing, TPS Brake Rotors/ Kits, Stainless Steel Brake Lines & much more...Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
Last edited by TPSMak; 10-11-2013 at 11:35 AM.
#4
Drifting
Member Since: Jun 2010
Location: Litchfield Minnesota
Posts: 1,252
Likes: 0
Received 6 Likes
on
5 Posts
Question
TPSMak,
I am a new ZR1 owner (first corvette). Would you please explain exactly how and where these work on our cars and why they are a necessity. If they are necessary, to avoid body damage during normal jacking, then it seems like cheap insurance and I will certainly purchase a set. Thanks in advance for your reply.
Regards,
I am a new ZR1 owner (first corvette). Would you please explain exactly how and where these work on our cars and why they are a necessity. If they are necessary, to avoid body damage during normal jacking, then it seems like cheap insurance and I will certainly purchase a set. Thanks in advance for your reply.
Regards,
#5
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
TPSMak,
I am a new ZR1 owner (first corvette). Would you please explain exactly how and where these work on our cars and why they are a necessity. If they are necessary, to avoid body damage during normal jacking, then it seems like cheap insurance and I will certainly purchase a set. Thanks in advance for your reply.
Regards,
I am a new ZR1 owner (first corvette). Would you please explain exactly how and where these work on our cars and why they are a necessity. If they are necessary, to avoid body damage during normal jacking, then it seems like cheap insurance and I will certainly purchase a set. Thanks in advance for your reply.
Regards,
Here is one that is installed
#6
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Finishing up another batch.. who else would like a set?
Click here to place your order
http://tpsmotorsports.com/tps-heavy-...-set-of-4.html
Here's cool video of how they work....
http://www.youtube.com/watch?v=gRZXmX4TcDg
Click here to place your order
http://tpsmotorsports.com/tps-heavy-...-set-of-4.html
Here's cool video of how they work....
http://www.youtube.com/watch?v=gRZXmX4TcDg
#13
Tech Contributor
Member Since: Mar 1999
Location: Northern VA
Posts: 10,063
Received 3,803 Likes
on
1,143 Posts
"Ask Tadge" Producer
FWIW, there's no way those will work properly with a ZR1 or a Z07-equipped Z06 with side skirts. They're not tall enough.
Buyer beware, etc.
Buyer beware, etc.
#15
Tech Contributor
Member Since: Mar 1999
Location: Northern VA
Posts: 10,063
Received 3,803 Likes
on
1,143 Posts
"Ask Tadge" Producer
Redo the picture so that the camera is along side the skirt, looking towards the puck. If the puck hangs belong the skirt, then there's no problem. If it doesn't hang below the skirt, there is.
I know for a fact hockey pucks aren't tall enough. So if these are built from hockey pucks, then...
I know for a fact hockey pucks aren't tall enough. So if these are built from hockey pucks, then...
#16
Melting Slicks
Redo the picture so that the camera is along side the skirt, looking towards the puck. If the puck hangs belong the skirt, then there's no problem. If it doesn't hang below the skirt, there is.
I know for a fact hockey pucks aren't tall enough. So if these are built from hockey pucks, then...
I know for a fact hockey pucks aren't tall enough. So if these are built from hockey pucks, then...
#17
Tech Contributor
Member Since: Mar 1999
Location: Northern VA
Posts: 10,063
Received 3,803 Likes
on
1,143 Posts
"Ask Tadge" Producer
Two hockey pucks. Seriously. That's what I did until a different vendor built a solution after I chatted with their CF rep at Carlisle last year. He went back to Michigan (that's the only hint I'm going to give in this thread) and had a solution cooked up in no time. It works perfectly. Their lift pucks are long enough that they hang below the skirts.
Sorry I'm being vague, but I think talking about Vendor X's solution in Vendor Y's thread isn't cool.
Sorry I'm being vague, but I think talking about Vendor X's solution in Vendor Y's thread isn't cool.
#18
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Bump for the cheapest insurance you can get for your C5 or C6... everyone should have a set of these in their trunk! You never know when you may to lift or jack up your Vette