[Z06] 2009 Z06 Dead Battery and "PMH" DIC Message
#1
Team Owner
Thread Starter
2009 Z06 Dead Battery and "PMH" DIC Message
So I went to start my Z06 this morning and it turned over a couple times, then nothing. Next turn of the key produces a "PMH" code in the DIC and then the gauges all reset.
Now it won't turn at all and displays all the warning codes "Service Active Handling", "Service Traction Control", "Ice Possible" "Service Vehicle Soon", etc.
I'm thinking the battery is toast, so have it on a charger. Any ideas?
Thanks in advance!
(break)
Well, the battery was obviously dead. Charged it up and the Vette fired up and ran fine. I will probably get a new battery soon as I don't know the status of this one (just bought the car in November).
All the codes are gone except "PMH" in the DIC before it goes to the normal odometer.
Any ideas? I posted this in C6 General, but figured my C6Z brethren would be able to diagnose.
Now it won't turn at all and displays all the warning codes "Service Active Handling", "Service Traction Control", "Ice Possible" "Service Vehicle Soon", etc.
I'm thinking the battery is toast, so have it on a charger. Any ideas?
Thanks in advance!
(break)
Well, the battery was obviously dead. Charged it up and the Vette fired up and ran fine. I will probably get a new battery soon as I don't know the status of this one (just bought the car in November).
All the codes are gone except "PMH" in the DIC before it goes to the normal odometer.
Any ideas? I posted this in C6 General, but figured my C6Z brethren would be able to diagnose.
#3
Team Owner
Thread Starter
#4
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,094
Received 8,928 Likes
on
5,333 Posts