[Z06] ZR1 side skirt install
#21
do yourself a favor and rivet the side skirts on. you need 4 rivets to attach the fender pieces to the side skirt anyway. it does a much better job and holds it much tighter to the car. and to drill them out incase you need to remove them is not a problem. another option is to go to GMpartshouse.com and buy the factory mudflaps. they are better quality and come with all screws and rivets needed for mudflap and sideskirts.
also what size rivets and drill bit?
#23
Le Mans Master
Do you use 3/16 rivets for every hole or just for securing the mudflaps?
#25
Cruising
Member Since: Mar 2009
Location: woodcliff lake nj
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
rear mud flap
why would you buy the front one. if you have a z or gs you have the front mudflap. you want the rear mudflap from a zr1. CALL (484) 949-2099. tell them you want {Hardware and splash guard kit} - $216.56 (for both sides)
that is gmpartshouse.com. it is genuine GM parts. it will have everything you need for the side skirt install and you will be much happier with there mud flaps instead of RPI's. good luck
that is gmpartshouse.com. it is genuine GM parts. it will have everything you need for the side skirt install and you will be much happier with there mud flaps instead of RPI's. good luck
c5, c6, corvette, instalation, install, installation, installing, installion, rivets, rpi, side, sides, sideskirt, skirt, skirts, zr1