08BLACKZ06

These are the numbers from my Beelzebub cam and ARH longtubes install. Blue is halltech and tune, red is after cam and headers. Cant wait to get a chance to open it up!

Mopar Jimmy

Nice power pick up (548rwhp) SAE corrected is about average for a cam only Z06 with bolt ons.

Should be A LOT quicker enjoy it in good health!

tail_lights

Great results!!! Hope to add one of these (C6Z06) to my stable one day!

08BLACKZ06

Thanks guys! Yeah runs a lot better and drives pretty nice to. Mild surge below 1300 rpms, but cruises at 65 in 6th with no surge, anything below that 5th is needed. Used to drive it that way before the cam,so really no different. Sounds great to!

GARY2004Z06

Enjoy.

Frans96ss

Glad you are happy with it. I think it turned out very well for the mods we did. Nice cam name haha

spartanc6z06

Custom grind from RPM? Whats the specs? Any other bolt-ons except intake, exhuast and tune? Nice numbers....

08BLACKZ06

Custom from RPM. Specs are 2** intake and 2** exhaust duration at .050 6** intake and 6** exhaust lift on a 1** center Sorry could not resist. Ill pm you the specs.

RNSTHMHRD

Would love to get some info on your RPM B3 cam. Looking at that and the BTR stage3. I'm concerned about surging at cruising speeds and bucking in lower RPM. Also the lift. How agressive is it? Whats the powerband for this cam 2500-7000? Thanks for any help you can give me. I wanna bang gears like Big Kleib, but not have to fight the car every other second I'm driving it. Thanks again....

Dan

Frans96ss

The cam drives great as long as you have a good tuner. No issues at all with cruising around

cseaman

Uh, so if you purposely built a street worthy cam, as opposed to a dyno queen, what exactly do you gain by keeping it "secret"??

There are a zillion Z06s with a cam and minimal other mods, including mine, it's not like you're doing anything groundbreaking.

Frans96ss

This thread is 7 years old.

REDZED2

Actually 6 years.

cseaman

lolol oops - at least it wasn't my fault it got bumped