When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
C6 Corvette ZR1 & Z06General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Was wondering if some of you guys could help me out here, I'm finishing up my zr1 build and was wonder if you guys could post up picks of the vacuum line routing and I'm also running the Stewart water pump with a water tank in the rear and was hoping to see some pics how other guys are mounting theirs
Last edited by Tpap89; 04-05-2016 at 09:37 AM.
Reason: Spelling
Got the vacuum lines figured out, running just a basic square water tank similar to the chiseled performance water tank
pump should be on the outlet of the tank. Run the lines from the pump through the rear bumper and into the rear fender above the liner and down the frame rail. Then straight up to the blower, black out into heat exchanger. Then come out of heat exchanger back to the tank.
pump should be on the outlet of the tank. Run the lines from the pump through the rear bumper and into the rear fender above the liner and down the frame rail. Then straight up to the blower, black out into heat exchanger. Then come out of heat exchanger back to the tank.