[ZR1] The C6 ZR1 1/4 Mile and Standing Mile Fast List
#141
Racer
I have the yellow ZR1 built by D3PE. I was running a tad over 1100whp before and they hooked up great in 3rd on the street, no progressive or anything. Going to bring some spray into 2nd gear using progressive now. I also have ProEFI traction control though so traction is no problem for me lol. And they were perfectly stable at 170mph with 15psi in them at TI.
#142
Racer
October 2014
Year of the ZR1: 2009
Tires used on the pass: continental 245 45 18 front and 345 35 18 mickey et street 2 rears
Performance Mods: Heads/Cam, 102TB, Ported H/SC/Snout, headers, 2.3 upper, 14% lower, Methanol Injection (pre-blower), E85, D3 HX system, RPS triple carbon clutch. 200 shot of sauce through n20 lid spacer.
Category submitted for: standing half mile modified
1/2 mile 185.7 mph (clutch was slipping, glazed prior to event)
Mile 201.4 MPH (let off due to no roll bar)
Name of the track: Coalinga municipal airport at shift sector event socal
Date of pass: 10/26/2014
Weather conditions: 90F ambient on track
Year of the ZR1: 2009
Tires used on the pass: continental 245 45 18 front and 345 35 18 mickey et street 2 rears
Performance Mods: Heads/Cam, 102TB, Ported H/SC/Snout, headers, 2.3 upper, 14% lower, Methanol Injection (pre-blower), E85, D3 HX system, RPS triple carbon clutch. 200 shot of sauce through n20 lid spacer.
Category submitted for: standing half mile modified
1/2 mile 185.7 mph (clutch was slipping, glazed prior to event)
Mile 201.4 MPH (let off due to no roll bar)
Name of the track: Coalinga municipal airport at shift sector event socal
Date of pass: 10/26/2014
Weather conditions: 90F ambient on track
#143
i have a video on my phone, havent uploaded to youtube. ill see if i can get it posted. wont make it out to sulphur sadly. motors coming out for a freshen up. toasted a lifter and it hurt the cam.
#144
Racer
Darn, I was looking forward to seeing your car run. Hopefully it'll be back soon.
#145
Melting Slicks
Thread Starter
All updates added.
Now a question open for debate. I am considering allowing the stock size PSS ZP and Cup 2 ZP tires for the Bone Stock 1/4 mile category. The PS2 is now out of production and the Cup 1 is soon to follow. The new Michelins seem to be the direct factory replacements. Thoughts?
Now a question open for debate. I am considering allowing the stock size PSS ZP and Cup 2 ZP tires for the Bone Stock 1/4 mile category. The PS2 is now out of production and the Cup 1 is soon to follow. The new Michelins seem to be the direct factory replacements. Thoughts?
#147
Racer
All updates added.
Now a question open for debate. I am considering allowing the stock size PSS ZP and Cup 2 ZP tires for the Bone Stock 1/4 mile category. The PS2 is now out of production and the Cup 1 is soon to follow. The new Michelins seem to be the direct factory replacements. Thoughts?
Now a question open for debate. I am considering allowing the stock size PSS ZP and Cup 2 ZP tires for the Bone Stock 1/4 mile category. The PS2 is now out of production and the Cup 1 is soon to follow. The new Michelins seem to be the direct factory replacements. Thoughts?
#148
Drifting
All updates added.
Now a question open for debate. I am considering allowing the stock size PSS ZP and Cup 2 ZP tires for the Bone Stock 1/4 mile category. The PS2 is now out of production and the Cup 1 is soon to follow. The new Michelins seem to be the direct factory replacements. Thoughts?
Now a question open for debate. I am considering allowing the stock size PSS ZP and Cup 2 ZP tires for the Bone Stock 1/4 mile category. The PS2 is now out of production and the Cup 1 is soon to follow. The new Michelins seem to be the direct factory replacements. Thoughts?
#149
#151
Year of the ZR1: 2011
Tires used on the pass: MT ET Street R
Performance Mods (if any): Bolt ons, Cam, Ported Stock Heads, NO nitrous.
Category submitted for:
60'............. 1.624
330'........... 4.225
660'........... 6.386
660’ mph... 115.09
1000'.......... 8.224
1320'.......... 9.773
1320’ mph… 144.29
Name of the track: Cecil County Dragway
Date of pass: 9-27-15
Weather conditions: (include Density Altitude, if known):
Image of complete Time Slip:
Tires used on the pass: MT ET Street R
Performance Mods (if any): Bolt ons, Cam, Ported Stock Heads, NO nitrous.
Category submitted for:
60'............. 1.624
330'........... 4.225
660'........... 6.386
660’ mph... 115.09
1000'.......... 8.224
1320'.......... 9.773
1320’ mph… 144.29
Name of the track: Cecil County Dragway
Date of pass: 9-27-15
Weather conditions: (include Density Altitude, if known):
Image of complete Time Slip:
Last edited by gkzr1; 03-24-2016 at 11:20 AM.
#152
Year of the ZR1: 2011
Tires used on the pass: M&H
Performance Mods (if any): FBO, ported stock heads, cam, nitrous
Category submitted for (stock or modified): MODIFIED
Mile or 1/2 Mile Trap Speed (mph)..... 180.7229
Name of the event/track: WannaGoFast Virginia 1/2 Mile
Date of pass: May 2nd, 2015
Weather conditions: (include Density Altitude, if known):
Image of complete Time Slip or Speed Certificate:
Link to Offical Event Results: http://wannagofast.com/event-time/va...ll2015_fin.htm
Link to Corvette Forum thread containing report: none posted
Link to Video: none posted
Tires used on the pass: M&H
Performance Mods (if any): FBO, ported stock heads, cam, nitrous
Category submitted for (stock or modified): MODIFIED
Mile or 1/2 Mile Trap Speed (mph)..... 180.7229
Name of the event/track: WannaGoFast Virginia 1/2 Mile
Date of pass: May 2nd, 2015
Weather conditions: (include Density Altitude, if known):
Image of complete Time Slip or Speed Certificate:
Link to Offical Event Results: http://wannagofast.com/event-time/va...ll2015_fin.htm
Link to Corvette Forum thread containing report: none posted
Link to Video: none posted
Last edited by gkzr1; 11-29-2015 at 12:24 AM.
#153
I have Zr1 with only long tube AR headers, now I'm going to get full package from lingenfelter which include smaller pulley, snout, air intake etc..! I live in Dubai and need from you guys to help me I have two questions.
1- need to fix heads on my car so which is the best heads with all parts, springs valves, rockers arms etc..!
2- if I fix all parts foregoing does it my car needs cooler I mean upgrade fans, upgrade cooler, heat exchanger and so on.
1- need to fix heads on my car so which is the best heads with all parts, springs valves, rockers arms etc..!
2- if I fix all parts foregoing does it my car needs cooler I mean upgrade fans, upgrade cooler, heat exchanger and so on.
#154
Safety Car
I have Zr1 with only long tube AR headers, now I'm going to get full package from lingenfelter which include smaller pulley, snout, air intake etc..! I live in Dubai and need from you guys to help me I have two questions.
1- need to fix heads on my car so which is the best heads with all parts, springs valves, rockers arms etc..!
2- if I fix all parts foregoing does it my car needs cooler I mean upgrade fans, upgrade cooler, heat exchanger and so on.
1- need to fix heads on my car so which is the best heads with all parts, springs valves, rockers arms etc..!
2- if I fix all parts foregoing does it my car needs cooler I mean upgrade fans, upgrade cooler, heat exchanger and so on.
#155
Racer
Year of the ZR1: 2009.
Tires used on the pass: 335/18 Hoosier drag radails.
Performance Mods (if any): Heads/Cam/ported blower/pulley/meth/e85.
Category submitted for: Internal Engine and/or Aftermarket Power Adders
60'.............1.575
330'...........4.125
660'...........6.257
660’ mph....118.26
1000'..........8.091
1320'..........9.610
1320’ mph….148.78
Name of the track: Bradenton Motorsports Park.
Date of pass:12/19/2015
Weather conditions: 68 degrees, -51 feet DA
Image of complete Time Slip:
(far right)
Link to Corvette Forum thread containing report:
https://www.corvetteforum.com/forums...ck-clutch.html
Link to Video:
Thanks,
-Matt
Tires used on the pass: 335/18 Hoosier drag radails.
Performance Mods (if any): Heads/Cam/ported blower/pulley/meth/e85.
Category submitted for: Internal Engine and/or Aftermarket Power Adders
60'.............1.575
330'...........4.125
660'...........6.257
660’ mph....118.26
1000'..........8.091
1320'..........9.610
1320’ mph….148.78
Name of the track: Bradenton Motorsports Park.
Date of pass:12/19/2015
Weather conditions: 68 degrees, -51 feet DA
Image of complete Time Slip:
(far right)
Link to Corvette Forum thread containing report:
https://www.corvetteforum.com/forums...ck-clutch.html
Link to Video:
Thanks,
-Matt
#156
Racer
Thanks much for doing this fast list. It is both much needed, and much appreciated.
Year of the ZR1: 2010
Tires used on the pass: OEM stock
Performance Mods (if any): Factory Stock
Category submitted for (stock or modified): Factory Stock
Mile Trap Speed (mph).....: 180.3 mph
Name of the event/track: Texas Mile (Goliad, TX)
Date of pass: October 23, 2010
Weather conditions: (include Density Altitude, if known): Mid-70s, DA unknown, 10mph cross/head wind
Pump gas 93 octane
Year of the ZR1: 2010
Tires used on the pass: OEM stock
Performance Mods (if any): Factory Stock
Category submitted for (stock or modified): Factory Stock
Mile Trap Speed (mph).....: 180.3 mph
Name of the event/track: Texas Mile (Goliad, TX)
Date of pass: October 23, 2010
Weather conditions: (include Density Altitude, if known): Mid-70s, DA unknown, 10mph cross/head wind
Pump gas 93 octane
Do you remember how much gas you had in the tank ?
Does having 2-3 gallons vs 11-12 make a difference ?
-Chris
#157
Racer
Zr1 1/4 mile fast list
Year of the ZR1: 2009
Tires used on the pass: stock run flats
Performance Mods (if any): none
Category submitted for: 1/4 mile
60'.............1.894
330'...........4.928
660'...........7.412
660’ mph...98.80
1000'..........9.537
1320'..........11.321
1320’ mph…126.59
Name of the track: raceway park BJ
Date of pass:August 2nd 2015
Tires used on the pass: stock run flats
Performance Mods (if any): none
Category submitted for: 1/4 mile
60'.............1.894
330'...........4.928
660'...........7.412
660’ mph...98.80
1000'..........9.537
1320'..........11.321
1320’ mph…126.59
Name of the track: raceway park BJ
Date of pass:August 2nd 2015
Last edited by gcolella; 03-10-2016 at 02:05 PM.
#158
Instructor
Year of the ZR1: 2009
Tires used on the pass: Mickey Thompson ET Street SS (335/30/20)
Performance Mods (if any): Intake/Ported snout & blower/LT/2.6" upper/E85
Category submitted for (stock or modified): modified
Mile or 1/2 Mile Trap Speed (mph): 164.3
Name of the event/track: Wannagofast @ Jumbolair (Ocala, Fl)
Date of pass: 01/24/2016
Weather conditions: (include Density Altitude, if known): ~40*F
Image of complete Time Slip or Speed Certificate:
Link to Offical Event Results:
http://wannagofast.com/events.php
Link to Corvette Forum thread containing report:
Link to Video:
Tires used on the pass: Mickey Thompson ET Street SS (335/30/20)
Performance Mods (if any): Intake/Ported snout & blower/LT/2.6" upper/E85
Category submitted for (stock or modified): modified
Mile or 1/2 Mile Trap Speed (mph): 164.3
Name of the event/track: Wannagofast @ Jumbolair (Ocala, Fl)
Date of pass: 01/24/2016
Weather conditions: (include Density Altitude, if known): ~40*F
Image of complete Time Slip or Speed Certificate:
Link to Offical Event Results:
http://wannagofast.com/events.php
Link to Corvette Forum thread containing report:
Link to Video:
#159
Racer
New Best run at Texas Mile.
Year of the ZR1: 2009
Tires used on the pass: Hoosier R6
Performance Mods (if any): Pfadt headers, 2.6" upper (stock snout) and 10% lower pullies, E85 Tune (stock injector enlargement), Mustang Dyno - 625 RWHP.
Category submitted for: Standing mile
Name of the track: Texas Mile, Beeville Texas.
Date of pass: 4/1/2016
Weather conditions:Temp low 60's, tailwind 10-13 MPH
Image of complete Time Slip:
Tires used on the pass: Hoosier R6
Performance Mods (if any): Pfadt headers, 2.6" upper (stock snout) and 10% lower pullies, E85 Tune (stock injector enlargement), Mustang Dyno - 625 RWHP.
Category submitted for: Standing mile
Name of the track: Texas Mile, Beeville Texas.
Date of pass: 4/1/2016
Weather conditions:Temp low 60's, tailwind 10-13 MPH
Image of complete Time Slip:
Last edited by blaSSt; 04-07-2016 at 03:33 PM.
#160
Year of the ZR1: 2009
Tires used on the pass: Hoosier R6
Performance Mods (if any): Pfadt headers, 2.6" upper (stock snout) and 10% lower pullies, E85 Tune (stock injector enlargement), Mustang Dyno - 625 RWHP.
Category submitted for: Standing mile
Name of the track: Texas Mile, Beeville Texas.
Date of pass: 4/1/2016
Weather conditions:Temp low 60's, tailwind 10-13 MPH
Image of complete Time Slip:
Tires used on the pass: Hoosier R6
Performance Mods (if any): Pfadt headers, 2.6" upper (stock snout) and 10% lower pullies, E85 Tune (stock injector enlargement), Mustang Dyno - 625 RWHP.
Category submitted for: Standing mile
Name of the track: Texas Mile, Beeville Texas.
Date of pass: 4/1/2016
Weather conditions:Temp low 60's, tailwind 10-13 MPH
Image of complete Time Slip: