[Z06] KATECH Ultra Track Attack Z06- 717hp/2900lbs - The Ultimate Track Toy Concept
#1
Premium Supporting Vendor
Thread Starter
KATECH Ultra Track Attack Z06- 717hp/2900lbs - The Ultimate Track Toy Concept
Here is a concept package to get your engines revving. Can you imagine a group of these in all different colors terrorizing the road courses of America?
ULTRA TRACK ATTACK Z06 SPECS:
Not legal for road use in the United States. For track use or export only. However it would be street-able for vehicles operating outside of the United States.
717hp
650ft-lbs
7000rpm redline
2900lbs or less
4.0lb/hp
Estimated performance:
0-60 2.9s
1/4 mi: 10.9 @ 140
Top speed: 180mph wing on, 210mph wing off
Skidpad: 1.5g
Nurburgring with Mero driving: 7:00
ENGINE - Katech Ultra Track Attack LS7:
4.205 bore
4.250 stroke
472ci
Dart/Katech Billet block
Forged 4340 crankshaft
Forged H-beam rods
Forged 2618 pistons
DLC coated pins
C5-R timing chain
Aggressive camshaft (hydraulic roller)
Single beehive valve springs
Titanium valve spring retainers
High speed lifters
CNC-ported LS7 heads
Titanium intake valves
Sodium filled hollow exhaust valves
Bronze valve guides
FAST LSXR 102mm intake, painted satin black
NW 102mm throttle body
Katech billet fuel rails
Katech AN fuel lines
FAST injectors
ATI damper
Dailey dry sump pump (4 scavenge, 1 pressure)
Oil tank
Dailey Billet oil pan
Katech billet front cover
Katech billet belt tensioner
Katech aluminum valve covers, powdercoated
Katech coil relocation kit
Katech spark plug wires
Halltech CF112 intake
Halltech Superbeehive
Dailey system not pictured
EXHAUST:
Kooks headers, ceramic coated
X-pipe
Corsa mufflers
Koolmat tunnel heat shield
Gold film heat shield shielding
COOLING:
Dewitts radiator
Integrated oil cooler
DRIVETRAIN:
RPM level V trans and diff, micropolished
Quaife differential
Pfadt carbon fiber driveshaft
Exedy twin disk clutch
BRAKES:
Brembo GT 15" front
Brembo GT 13.6" rear
Slotted 2pc rotors
Spindle ducts
SUSPENSION:
Moton Clubsport double-adjustable coil-overs
Pfadt competition sway bars
Pfadt pillow blocks
Pfadt camber kit
Pfadt poly bushings
SKF hubs
ARP wheel studs
Interior:
Caravaggio hand stitched alcantara steering wheel with flat bottom
Caravaggio hand stitched alcantara parking brake boot and ****
Caravaggio hand stitched alcantara shifter boot and ****
Caravaggio hand stitched alcantara center console lid
Caravaggio Daytona seats with alcantara centers, carbon shell and belt pass-throughs
4pt roll bar, 6-point optional
Schroth camlock harnesses
BODY/AERO/EXTERIOR
World Challenge carbon fiber lift-off hood
Hood pins
Katech carbon fiber front splitter with undertray and integrated brake ducts
Katech front fascia reinforcement
Katech carbon fiber side skirts
World Challenge carbon fiber wing
Sticker package with customized number selection and driver/passenger names
WHEELS/TIRES:
OZ Ultraleggara HLT wheels 19x10 & 20x12, black
Michelin Pilot Sport cup tires 285/30R19 & 335/25R20
est. $113k plus base vehicle
ULTRA TRACK ATTACK Z06 SPECS:
Not legal for road use in the United States. For track use or export only. However it would be street-able for vehicles operating outside of the United States.
717hp
650ft-lbs
7000rpm redline
2900lbs or less
4.0lb/hp
Estimated performance:
0-60 2.9s
1/4 mi: 10.9 @ 140
Top speed: 180mph wing on, 210mph wing off
Skidpad: 1.5g
Nurburgring with Mero driving: 7:00
ENGINE - Katech Ultra Track Attack LS7:
4.205 bore
4.250 stroke
472ci
Dart/Katech Billet block
Forged 4340 crankshaft
Forged H-beam rods
Forged 2618 pistons
DLC coated pins
C5-R timing chain
Aggressive camshaft (hydraulic roller)
Single beehive valve springs
Titanium valve spring retainers
High speed lifters
CNC-ported LS7 heads
Titanium intake valves
Sodium filled hollow exhaust valves
Bronze valve guides
FAST LSXR 102mm intake, painted satin black
NW 102mm throttle body
Katech billet fuel rails
Katech AN fuel lines
FAST injectors
ATI damper
Dailey dry sump pump (4 scavenge, 1 pressure)
Oil tank
Dailey Billet oil pan
Katech billet front cover
Katech billet belt tensioner
Katech aluminum valve covers, powdercoated
Katech coil relocation kit
Katech spark plug wires
Halltech CF112 intake
Halltech Superbeehive
Dailey system not pictured
EXHAUST:
Kooks headers, ceramic coated
X-pipe
Corsa mufflers
Koolmat tunnel heat shield
Gold film heat shield shielding
COOLING:
Dewitts radiator
Integrated oil cooler
DRIVETRAIN:
RPM level V trans and diff, micropolished
Quaife differential
Pfadt carbon fiber driveshaft
Exedy twin disk clutch
BRAKES:
Brembo GT 15" front
Brembo GT 13.6" rear
Slotted 2pc rotors
Spindle ducts
SUSPENSION:
Moton Clubsport double-adjustable coil-overs
Pfadt competition sway bars
Pfadt pillow blocks
Pfadt camber kit
Pfadt poly bushings
SKF hubs
ARP wheel studs
Interior:
Caravaggio hand stitched alcantara steering wheel with flat bottom
Caravaggio hand stitched alcantara parking brake boot and ****
Caravaggio hand stitched alcantara shifter boot and ****
Caravaggio hand stitched alcantara center console lid
Caravaggio Daytona seats with alcantara centers, carbon shell and belt pass-throughs
4pt roll bar, 6-point optional
Schroth camlock harnesses
BODY/AERO/EXTERIOR
World Challenge carbon fiber lift-off hood
Hood pins
Katech carbon fiber front splitter with undertray and integrated brake ducts
Katech front fascia reinforcement
Katech carbon fiber side skirts
World Challenge carbon fiber wing
Sticker package with customized number selection and driver/passenger names
WHEELS/TIRES:
OZ Ultraleggara HLT wheels 19x10 & 20x12, black
Michelin Pilot Sport cup tires 285/30R19 & 335/25R20
est. $113k plus base vehicle
Last edited by Katech_Zach; 07-28-2011 at 12:56 PM.
#7
Burning Brakes
"Not legal for road use in the United States."
I guess you must be located outside the U.S.A? HAHA LOL, that package is amazing and if I had the disposable income I would write you a check in a heartbeat for a MONSTER setup like that!
I guess you must be located outside the U.S.A? HAHA LOL, that package is amazing and if I had the disposable income I would write you a check in a heartbeat for a MONSTER setup like that!
#9
Premium Supporting Vendor
Thread Starter
We are in the US, but I can see Canada from my house. (in a Sarah Palin voice)
#11
Melting Slicks
Wow, that concept car looks just like your car Jason! That would be (is) an awesome package for sure.
Will we get to see it at a Track Attack event next year?
Will we get to see it at a Track Attack event next year?
#12
Premium Supporting Vendor
Thread Starter
#14
Supporting Vendor
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
Jason, are you going with the Caravaggio seats? Do you know the weight savings?
Jim
Jim
__________________
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
262-510-7600
For service email:
orders@halltechsystems.com
www.halltechsystems.com
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
262-510-7600
For service email:
orders@halltechsystems.com
www.halltechsystems.com
#16
Premium Supporting Vendor
Thread Starter