Notices
C6 Corvette ZR1 & Z06 General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Sponsored by:
Sponsored by: Kraken

[Z06] 2011 Zo7 does it have the facia brace??

Thread Tools
 
Search this Thread
 
Old 08-11-2011, 01:13 AM
  #1  
seamus2154
Drifting
Thread Starter
 
seamus2154's Avatar
 
Member Since: Nov 2008
Location: Palm Beach Florida
Posts: 1,416
Received 125 Likes on 94 Posts

Default 2011 Zo7 does it have the facia brace??

Hey Guys, I have a 2011 zo6 w/ the Zo7 package. It does not have the optional Carbon fiber package. I am considering adding the side skirts, spoiler, and front splitter. My question is do all the Zo7's have this brace as the Zr1 does or only if the Carbon package is ordered. It has to go on before the bumper is put on the car so I'm hoping all Zo7's have this brace. I know the ZR1 has it obviously, and most Zo7's have the carbon package. So that would make sense to put it on all Zo7's. I would figure it does but could be wrong. I do higher speed runs and don't want my chin on the ground as I see in alot of the Texas mile runs at high speed w/ Zo6's w/o the brace and just a splitter. I really don't want to pull the bumper. Thanks Guys!
Old 08-11-2011, 11:02 AM
  #2  
FNBADAZ06
Le Mans Master
 
FNBADAZ06's Avatar
 
Member Since: Jun 2009
Posts: 6,726
Received 634 Likes on 443 Posts

Default

Originally Posted by seamus2154
Hey Guys, I have a 2011 zo6 w/ the Zo7 package. It does not have the optional Carbon fiber package. I am considering adding the side skirts, spoiler, and front splitter. My question is do all the Zo7's have this brace as the Zr1 does or only if the Carbon package is ordered. It has to go on before the bumper is put on the car so I'm hoping all Zo7's have this brace. I know the ZR1 has it obviously, and most Zo7's have the carbon package. So that would make sense to put it on all Zo7's. I would figure it does but could be wrong. I do higher speed runs and don't want my chin on the ground as I see in alot of the Texas mile runs at high speed w/ Zo6's w/o the brace and just a splitter. I really don't want to pull the bumper. Thanks Guys!
I would hazard a guess and say it's NOT installed on any cars that do not have the carbon fiber package.
Old 08-11-2011, 12:23 PM
  #3  
BEZ06
Race Director
Support Corvetteforum!
 
BEZ06's Avatar
 
Member Since: Jan 2005
Location: Daytona Beach FL
Posts: 10,922
Received 835 Likes on 595 Posts

Default

with FNBADAZ06.

If it doesn't come from the factory with a splitter, then don't expect Chebie to put the splitter reinforcing piece in there.

Just MHO, YMMV!! Let us know what you find in there!!

Bob
Old 08-11-2011, 01:18 PM
  #4  
RichieRichZ06
Supporting Vendor
Support Corvetteforum!
 
RichieRichZ06's Avatar
 
Member Since: Nov 2005
Location: Supporting the Corvette Community at Abel Chevrolet in Rio Vista, CA 707-374-6317 Ext.123
Posts: 14,498
Received 1,425 Likes on 597 Posts
St. Jude Donor '08

Default

If the vehicle has the CFZ package, then it will have a splitter. I have not seen one on a vehicle without that package.

Get notified of new replies

To 2011 Zo7 does it have the facia brace??




Quick Reply: [Z06] 2011 Zo7 does it have the facia brace??



All times are GMT -4. The time now is 03:40 AM.