Aussie Vet

Can anyone running wheels 19" front 20" rear and 20" front and rear post pics please.

99% sure i want the black 360 mesh 8 concaves for my black Z, but Can't decide on sizes, 19/20 lets me run PS2 ZP, but sometimes 20/20 looks a little better, but then can't run ZP tires....

Please Help me decide, thanks.

1 BAD BURB

Suscribed as I am in the same boat. I have 20/20 and looking for pics.
What tire sizes are you going with?

Katech_Zach

Staggered 19/20 looks better. Plus 20's in the front can cause rubbing issues with the brake duct.

michaelinmech

I was 'advised' that 20's in the front are all about appearance only.

Both handling and ride as well as tire availability are better suited to a 19/20 stagger.

That was the consensus of the advice I received

btrapps

Subscribed..

What is the verdict with the 19/20 as far as an occassional track setup? I have read all of the threads about adding weight, etc. i was considering the cup wheels for my car but I am also curious about the downside (other than the cost of tires).

1 BAD BURB

What size tire should be used then to reduce chances of rubbing?
Aj

Jawnathin

ZR1/Z07 size tires seem to be appropriate, but it'll depend on your offset I'd imagine.

Front - 285/30/19
Rear - 335/25/20

Geared

i run 20/20 slammed on aftermarket bolts in the front - no rubbing, so with the right offsets, that is incorrect.
and IMO, 19/20 does NOT look better than 20/20.

The car may perform better with 19/20 (less weight, rotating mass) but nothing you will really notice in the SOTP.

I need to raise the rear slightly, which will cause the front to drop slightly, as I was rubbing the outer sidewall at WOT in the rear with a passenger.

Same wheels you want 360 forged mesh 8 20/20:

CW4L

No issues at all with a 20/20 setup. No rubbing, scraping, etc etc. We do them all day everyday. Nitto Invos 285/25/20 and 345/25/20. We even get customers now with 20/21 setups with no issues.

Shoot me a PM Aussie and I'll set you up nicely in a set of 360 Forgeds

The best ride quality is definitely 19/20 though.

All these concaves are 20/20 pictured below.

CW4L

19/20 Pictures

jbp8653

20/20 with Invos. No rubbing anywhere what so ever. Rides better than stock.

Geared

last pic in wheels for less post is a perfect example of why i DID NOT do 19/20....that front wheel looks so ODDLY SMALL to me.

fasthwks

Both are 19/20's. White one is lowered on cut bushings and the red one is all the way on stock bolts. I prefer 19/20 but both look good.

SRVfan09

19/20
Tires
285/30
345/25

billybadd

Beautiful, specs on wheels please.

SRVfan09

dfinke23

One thing to keep in mind, if you're making big power, go with the standard mesh 8's over the concaves. We just finished some simulation tests on proE that confirm our suspicion that cancaves are sunstantially weeker than traditional spokes.
I suspect, one of the reasons why none of the wheel co's that specialize in motorsport wheels offer the 3 piece concave design.

Rayzzz

19X10.5/20X13
THANKS RAYZZZ MY CORVETTE LIKES MY MONEY

TORQJNKY

20/20's ADV.1 ADV5's

EVILNESS

Ive had both 20/20 and now 19/20 and i would never do a 20 in the front again for a few reasons. they make the brakes look tiny and u have to run a rubberband of a tire making it real easy for u to bend the wheel on any sort of pothole. Just my 2 cents here is my 19/20 just for the record.