Any issues going with this tire/wheel size combo?
#1
Pro
Thread Starter
Any issues going with this tire/wheel size combo?
Looking at purchasing a set of wheels and tires but before I do I wanted to see if anyone on here has any experience or would possibly have any input on whether this wheel/tire combination will cause any issues at all. Meaning no rubbing, traction control issues, active handling issues, etc.
The sizes are:
Fronts- 295/30/19 on 11” wide wheels
Rears- 345/30/19 on 13” wide wheels
Wheels are: Signature SV501 Wheels
19x11 + 38
19x13 + 56
Would be going on a 2011 Z06.
Thank you!
The sizes are:
Fronts- 295/30/19 on 11” wide wheels
Rears- 345/30/19 on 13” wide wheels
Wheels are: Signature SV501 Wheels
19x11 + 38
19x13 + 56
Would be going on a 2011 Z06.
Thank you!
Last edited by harryk387; 01-26-2021 at 02:47 PM.
#2
Safety Car
Nope... absolutely zero issues... I run the same tire sizes on my '11 ZR1. My wheels are a little narrower (10.5 and 12), but that shouldn't make any difference with TC or AH
Find a wheel manufacturer who is familiar with the proper offsets for these widebody C6s, and you will be fine with no rubbing problems, at least at the standard ride height (where I run mine).
Find a wheel manufacturer who is familiar with the proper offsets for these widebody C6s, and you will be fine with no rubbing problems, at least at the standard ride height (where I run mine).
Last edited by WA 2 FST; 01-22-2021 at 11:45 AM.
#5
Drifting
Looking at purchasing a set of wheels and tires but before I do I wanted to see if anyone on here has any experience or would possibly have any input on whether this wheel/tire combination will cause any issues at all. Meaning no rubbing, traction control issues, active handling issues, etc.
The sizes are:
Fronts- 295/30/19 on 11” wide wheels
Rears- 345/30/19 on 13” wide wheels
Would be going on a 2011 Z06.
Thank you!
The sizes are:
Fronts- 295/30/19 on 11” wide wheels
Rears- 345/30/19 on 13” wide wheels
Would be going on a 2011 Z06.
Thank you!
#6
Drifting
No issue w the size. Assuming ur having them made, just have the manufacturer guarantee offset will not rub and will fit properly. If you re buying them used, no one can answer your question without having the offset.
#9
Instructor
I run the same tire size in an R888R, wheel width is 10.5 and 12 with +35 and +50 offsets, lowered on VMS bolts no rubbing. BCforged wheels. Will need to know your offsets to make sure.
#10
Pro
Thread Starter
Sorry all, forgot to include that information:
Signature SV501 Wheels & R888R tires
19x11 + 38 offset
19x13 + 56 offset
Tires are R888R
Last edited by harryk387; 01-26-2021 at 02:48 PM.