Notices
C6 Corvette ZR1 & Z06 General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Sponsored by:
Sponsored by: Kraken

[Z06] Crossed name off on the "assembled by" plate?

Thread Tools
 
Search this Thread
 
Old 07-06-2012, 09:13 PM
  #1  
srz06
Cruising
Thread Starter
 
srz06's Avatar
 
Member Since: Jul 2012
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default Crossed name off on the "assembled by" plate?

Hi folks, first post here. I recently became the owner of a 2006 Z06 with 20k miles.

I looked at the “assembled with pride” plate on the engine and noticed the name was crossed off with a sharpie and some initials were written next to it. I didn’t have much luck using the search to locate an answer. Anyone seen something like this before? Not sure if it left the factory like this or it was done afterwards, for whatever reason...


Old 07-06-2012, 09:27 PM
  #2  
3LZZ06
_"SCOTT"_
Support Corvetteforum!
 
3LZZ06's Avatar
 
Member Since: Mar 2009
Location: South Florida
Posts: 6,874
Received 53 Likes on 43 Posts

Default

Probably done by someone who modded the chit out of it, or it was done as a joke.
Old 07-06-2012, 09:41 PM
  #3  
Bowchickawowow
Racer
 
Bowchickawowow's Avatar
 
Member Since: Apr 2011
Location: Houston TX
Posts: 259
Likes: 0
Received 0 Likes on 0 Posts
Default

Might be beneficial to post this in the "who built your engine" sticky thread. Someone from the build center might be able to say whether or not that would have been an acceptable practice from the factory (although that doesn't guarantee that someone might not still do it).

Get notified of new replies

To Crossed name off on the "assembled by" plate?




Quick Reply: [Z06] Crossed name off on the "assembled by" plate?



All times are GMT -4. The time now is 04:12 AM.