[ZR1] Body Scoops -ZR1
05-04-2013, 08:16 PM
#1
Melting Slicks
Thread Starter
Body Scoops -ZR1
Looking to replace all of the body scoops with CF ones on my 2010. Mine do not look new (dull) and was wondering how difficult it will be to replace them...........thanks for helpful replies.
05-04-2013, 09:06 PM
#2
Le Mans Master
Member Since: Jul 2007
Location: Arkansas
Posts: 5,010
Received 1,342 Likes
on
778 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'22-'23
Fronts aren't to bad, rears are a pia. Not really difficult though, just have to deal with the brake duct tube on the rear.
05-04-2013, 09:16 PM
#3
Melting Slicks
Thread Starter
05-04-2013, 09:51 PM
#5
lifeislikeaboxofchocolats
Here are the dipped piece I used...rears are easily removed if you don't need to salvage...just cut the center web and squeeze together and remove..new pieces just press in
05-04-2013, 09:56 PM
#6
Drifting
Member Since: Jun 2010
Location: Litchfield Minnesota
Posts: 1,252
Likes: 0
Received 6 Likes
on
5 Posts
One may as well replace the rear mud guards with the CF versions as well as the diffuser at the same time as it is necessary to remove that entire wheel well liner to install any of those items. Best get it done all at once. Also, a strong hint to put 3M or some other clear bra material on the rear vent duct inlet pieces and the inside of the rear mud guards as they take a real beating from road debris.
05-04-2013, 09:59 PM
#7
lifeislikeaboxofchocolats
I also did this..had my CF mud guards wrapped with 3m before installing them
05-05-2013, 10:03 AM
#8
Melting Slicks
Thread Starter
Great ideas, I appreciate all of the comments......