[ZR1] just back from the dyno
#1
Melting Slicks
Thread Starter
just back from the dyno
had my car tuned by Tom VanVugt and it is running perfect. low end drivability is perfect and power is through the roof. here's my list of mods and dyno sheets.
91octane 721WHP/689TQ
91ocatne + Meth 744WHP/705TQ
Race Gas 783WHP/741TQ
LPE intake
4 inch intake tube
S&B air filter
Nick Williams 102 TB
Installed flipped to prevent closing under WOT
LPE ported snout
Snout is port matched to match NW 102 TB
LPE blower pulley
2.35 uppper pulley, stock crank pulley
Fast 85lb injectors
NGK TR7IX plugs
Custom Cam Motion Cam
236/250 .629/.629 on a 117+3
LPE LS9 Ported heads:
American Racing Headers
1 & 7/8’s, with hi flow cats
LG
High Capacity Radiator
D3
Heat Exchanger kit
D3
Dual Spal fan kit
Intercooler brick mod
Aquamist stage 3 dual nozzle Meth Kit
Elite engineering dual catch can set up
Elite engineering thick tunnel plate
red is race gas, blue is pump
91octane 721WHP/689TQ
91ocatne + Meth 744WHP/705TQ
Race Gas 783WHP/741TQ
LPE intake
4 inch intake tube
S&B air filter
Nick Williams 102 TB
Installed flipped to prevent closing under WOT
LPE ported snout
Snout is port matched to match NW 102 TB
LPE blower pulley
2.35 uppper pulley, stock crank pulley
Fast 85lb injectors
NGK TR7IX plugs
Custom Cam Motion Cam
236/250 .629/.629 on a 117+3
LPE LS9 Ported heads:
American Racing Headers
1 & 7/8’s, with hi flow cats
LG
High Capacity Radiator
D3
Heat Exchanger kit
D3
Dual Spal fan kit
Intercooler brick mod
Aquamist stage 3 dual nozzle Meth Kit
Elite engineering dual catch can set up
Elite engineering thick tunnel plate
red is race gas, blue is pump
Last edited by K B Vettin; 12-04-2014 at 08:42 PM.
#3
Melting Slicks
Thread Starter
No meth with the race gas. My meth kit is set up to spray the minimum and only at WOT. I'll never run the 91 + meth tune, I just don't trust it. I'm spraying for cooling and octane boost/knock suppression.
Last edited by K B Vettin; 12-04-2014 at 08:38 PM.
#6
Drifting
KB, can you post all the numbers in SAE? Or is the bottom SAE the best dyno pull in SAE?
STD will falsely inflate the numbers based on weather and elevation.
Thanks,
Dave
STD will falsely inflate the numbers based on weather and elevation.
Thanks,
Dave
#7
Melting Slicks
Thread Starter
#9
Le Mans Master
Very nice Kris, I'm going have to stop by here in the next few weeks to check out your new upgrades!
#10
Stout #'s indeed. What race gas are you using to allow you to run cats?
#11
Melting Slicks
Thread Starter