[Z06] Best place to get a tune for my C6Z in Houston?
#5
Safety Car
I've been tuned at 3 different places. By far the best one was from LMR. Problem there though is it takes days for them to get to it and that's with an appointment. But I'm also guessing YMMV
#6
Drifting
#8
Drifting
he does a dyno and road tune
#10
Drifting
#11
guess everyone has there preference, my car has been tuned by a couple shops listed in this thread and KP is the only one that has got it right.
#12
Burning Brakes
Houston Tuner
I recommend 510 Racing. Their tune is my third on a cammed car without LT headers. Neither the shop that installed the cam nor the second tuner got it right. My third stop was 510 Racing and they got it right. Before 510 Racing touched the tune they put it on their dyno and it made 490 HP (6 HP less than the second shop) and 463 torque. After they were done it made 515 HP and 485 ft-lbs of torque.
More important than they lowered the idle to 800 rpm and it idles much smoother than before. I won't way that the cowl shake is totally gone, but it is much less than before. Gas mileage is also better.
More important than they lowered the idle to 800 rpm and it idles much smoother than before. I won't way that the cowl shake is totally gone, but it is much less than before. Gas mileage is also better.
#13
Melting Slicks
To keep the options open since everyone is recommended someone different it seems.
But D3 Performance Engineering is the place to go for tuning and fabrication in my opinion. For high hp cars in Houston, Delgado and his team are pretty heavily involved with a lot of other high end shops working with them and their tuners from M2K Motorsports, LMR, Hennessey, etc...
But D3 Performance Engineering is the place to go for tuning and fabrication in my opinion. For high hp cars in Houston, Delgado and his team are pretty heavily involved with a lot of other high end shops working with them and their tuners from M2K Motorsports, LMR, Hennessey, etc...