Katech_Zach

My usual photo spot is occupied with some construction in the car shop, so this photo near the hoist will have to do.


Stage 2 package with K501 cam
Bronze valve guides
Ti/Mo intake/exhaust valves
MSD intake painted satin black
Halltech MF103
Nick Williams 102mm throttle body
ATI damper
Dewitts radiator
ARE Stage 3 dry sump system
Spintric air oil separator
LS9X clutch
Katech HD clutch hydraulics
RPM trans
Moton Clubsport double adjustable coil-overs
LG monoball kit

olddragger

that is a very nice build

fueledpassion

Does it not have headers?

FNBADAZ06

I see headers in the last pic....customer supplied/installed previously I bet.

LFZ

This car was built to work...I like it. Nice job Katech as always.

DaOtherOne

It looks like it has headers with Swain Tech White Lightning ceramic coating.

Nice looking build and great power and torque.

Katech_Zach

Yes, we installed headers. The car is being exported out of the country.

RedZ4me

Amazing builds you post - mild usually but done right. One thing I noticed is the continuous use of bronze guides..........I guess they are not so bad after all

Gering

Nice Build!

KMP377

Jason,


Do you know why the torque is low, shouldn't it be in the 520 range? Would milling the heads have helped?

Katech_Zach

MSD intake makes less torque than the usual FAST. Higher CR will increase torque.

Jake5670

Nice build!

CTYANK2

I saw this Z06 (in Connecticut) today! If it left the country it's back! Owner said he bought it new. Looked really good same as in photo's above.

Katech_Zach

I have documentation showing the car was being exported to Canada. As you can see there is no license plate on the vehicle in our shop.

CTYANK2

I should not have said "If" it left.
No doubt that Katech and the owner handled this properly.

7007vette

As stated by Katech, the car was exported. Brought back to the US when job returned to the US.