[Z06] CFSide Skirt & Splitter Review
#1
Drifting
Thread Starter
CF Side Skirt & Splitter Review
Hey Guys,
I don't usually venture over here too much but in my research of some replacement CF skirts & splitters for the ZR1, it seemed like you guys get a lot of that stuff too. Here is a small review of some parts I picked up that may be of interest to someone shopping in the future. Hope it helps.
Joe T.
https://www.corvetteforum.com/forums...post1591977617
I don't usually venture over here too much but in my research of some replacement CF skirts & splitters for the ZR1, it seemed like you guys get a lot of that stuff too. Here is a small review of some parts I picked up that may be of interest to someone shopping in the future. Hope it helps.
Joe T.
https://www.corvetteforum.com/forums...post1591977617
Last edited by jft69z; 04-11-2016 at 10:06 PM.
#2
Premium Supporting Vendor
It's unfortunate that we have to compete on price with companies who claim they are made in the USA but are made in Taiwan (or China and Mexico). Our carbon fiber parts are made right here in Michigan and you'll never see pulled weave like that.
#4
Burning Brakes
The CF kits are overall a great value...regardless of where they are made.
They fit well and are much more affordable than most of the others out there. For a part that will likely (eventually) get scraped up, there is no need to spend $2,000 on the parts in my opinion from someone else.
CF kits have my business, and will for any future projects.
They fit well and are much more affordable than most of the others out there. For a part that will likely (eventually) get scraped up, there is no need to spend $2,000 on the parts in my opinion from someone else.
CF kits have my business, and will for any future projects.
The following users liked this post:
jft69z (04-18-2016)