[Z06] C6Z06 H/C/I build by AHP
#1
Racer
Thread Starter
C6Z06 H/C/I build by AHP
Hello everyone wanted to start a thread of my build and experience with American Heritage Performance. Initially took my car down last summer to have them perform there Package 4 head package to be safe. Kohle was awesome to deal with answered all my emails and questions I had for him along the way. While it was down there I had him port the heads as well as my stock tb. Once all was put back together I had him dyno tune it on the dynapak they use it made 530/500. I was very happy with it and I knew it was safe and reliable.
Stock heads removed before they performed the package 4 setup
After driving it through the summer I knew I wanted to keep the mods coming. So I saved up and bought a set of Kooks 1 7/8 headers and a catless midpipe, MSD intake manifold, Halltech MF103 intake, BTR IV Cam, C7R timing chain, along with the associated ARP hardware to complete everything. I provided a cover for the car (The shop is next to a landscaping business so gets dusty) it was on the car from when I dropped it off till complete aside from the front obviously. During the teardown found my passenger side motor mount leaking so Kohle informed me and threw in a set he had in stock. After everything was complete he did a very soft street tune and worked alot on idle and low speed driveability. Parking lots are no issue idles along with no gas like stock which is great for that cam. I'm waiting to get an appointment for a full tune and at that time I will update the final numbers of what it makes.
Dirty cradle when it was pulled
Kohle pressure washed the cradle after. Looks brand new
Old cam coming out
All the goodies
Finished product. I like the unshaved look of the MSD personally ties in with the red hinson spark plug sleeves
Can't say thank you enough to Kohle and his team. If anyone needs work done on their Z06 or any LS platform get in touch with them.
Mod List:
AHP Package 4 head package (Ported)
BTR Stage IV Cam
C7R Timing Chain
BTR .660 Spring kit Titanium Retainers
Halltech MF103
FIC 72# Injectors
Ported MSD Intake
NW 102TB Black
Kooks 1 7/8 Headers
Catless Mid Pipe
Corsa Axleback
MGW Shifter
Here's a link to a cold start and idle video.
Thanks for reading everyone
Stock heads removed before they performed the package 4 setup
After driving it through the summer I knew I wanted to keep the mods coming. So I saved up and bought a set of Kooks 1 7/8 headers and a catless midpipe, MSD intake manifold, Halltech MF103 intake, BTR IV Cam, C7R timing chain, along with the associated ARP hardware to complete everything. I provided a cover for the car (The shop is next to a landscaping business so gets dusty) it was on the car from when I dropped it off till complete aside from the front obviously. During the teardown found my passenger side motor mount leaking so Kohle informed me and threw in a set he had in stock. After everything was complete he did a very soft street tune and worked alot on idle and low speed driveability. Parking lots are no issue idles along with no gas like stock which is great for that cam. I'm waiting to get an appointment for a full tune and at that time I will update the final numbers of what it makes.
Dirty cradle when it was pulled
Kohle pressure washed the cradle after. Looks brand new
Old cam coming out
All the goodies
Finished product. I like the unshaved look of the MSD personally ties in with the red hinson spark plug sleeves
Can't say thank you enough to Kohle and his team. If anyone needs work done on their Z06 or any LS platform get in touch with them.
Mod List:
AHP Package 4 head package (Ported)
BTR Stage IV Cam
C7R Timing Chain
BTR .660 Spring kit Titanium Retainers
Halltech MF103
FIC 72# Injectors
Ported MSD Intake
NW 102TB Black
Kooks 1 7/8 Headers
Catless Mid Pipe
Corsa Axleback
MGW Shifter
Here's a link to a cold start and idle video.
Thanks for reading everyone
Last edited by SpnkbnkZ06; 02-28-2017 at 12:28 PM.
The following users liked this post:
DPW_ (02-21-2017)
#3
Le Mans Master
Sounds great!
The following users liked this post:
SpnkbnkZ06 (02-21-2017)
#4
Racer
Thread Starter
The following users liked this post:
Brandon619 (02-21-2017)
The following 2 users liked this post by zblackz06:
American Heritage (02-22-2017),
SpnkbnkZ06 (02-21-2017)
#7
Racer
Thread Starter
The following users liked this post:
SpnkbnkZ06 (02-21-2017)
The following users liked this post:
SpnkbnkZ06 (02-21-2017)
#10
Racer
Thread Starter
#12
Safety Car
Should be 580 ish, love Kohles work, and his build ideas made my car sweet!
#13
Racer
Thread Starter
Yea Cunningham motorsports dyno reads very low same setup cars as mine plus e85 see 605ish. He says add 5% to whatever it gives you. I just want his tuning expertise it's just a number end of the day
#14
Burning Brakes
Gotcha. I'm glad you said that or else I would be second-guessing the stage 2 cam that I'm awaiting for my upcoming build. I'm having the heads shipped to Kohle as well. He has helped me a lot over the phone and always easy to deal with! If and when it becomes the wknd warrior, I think I know what cam to go with!
The following users liked this post:
American Heritage (02-22-2017)
#15
Racer
Thread Starter
Gotcha. I'm glad you said that or else I would be second-guessing the stage 2 cam that I'm awaiting for my upcoming build. I'm having the heads shipped to Kohle as well. He has helped me a lot over the phone and always easy to deal with! If and when it becomes the wknd warrior, I think I know what cam to go with!
Yea I think it could be a daily if you wanted depending on your traffic where you live. But as a weekend warrior absolutely!
#17
Racer
Thread Starter
I'm stationed in California so when I got the car I registered it back home which has no emissions and I don't get messed with. Most of the cops give me a thumbs up
#18
Team Owner
Nice build! Kohle does great work, as does Ryne. Ryne did the vast majority of work on my old C5Z as well as some work to my C6Z. Kohle did the heads on my C6Z just prior to me leaving SoCal. Highly recommend both...cant go wrong with either of those guys.
Any plans for a NW102?
Any plans for a NW102?
#19
#20
Racer
Thread Starter
Nice build! Kohle does great work, as does Ryne. Ryne did the vast majority of work on my old C5Z as well as some work to my C6Z. Kohle did the heads on my C6Z just prior to me leaving SoCal. Highly recommend both...cant go wrong with either of those guys.
Any plans for a NW102?
Any plans for a NW102?